250 LPH / MS DLX RO Water Plant

Supply TypeManufacturer, Supplier, Retailer
Preferred Buyer Location All over the world

PLANT INTRODUCTION This produces quality water at the flow rate of 1000 litres per hour. It can work continuously for 8 to 9 hours per day besides 0.5 hour to 1 hour for back-washing of the filtration system. Raw Water Analysis: This water treatment system is based on the following water analysis:

View More Details

Send Enquiry

Raw Water Analysis

Sl. No.	Parameter	Analysis Value
1	Total Dissolved Solids (TDS)	2000ppm
2	Turbidity	1 NTU
3	SDI	4
4	Heavy Metals	NIL
5	Organics And Bacteria	NIL
6	Oil And Grease	NIL
7	Residual Chlorine	NIL
8	Temperature	< 40˚C
9	Color	Colorless
10	Odour	Very Less Odour
11	BOD & COD	NIL
12	Total Hardness	850 PPM

END WATER QUALITY

Sl. No.	Parameter	Analysis Value
1	Total Dissolved Solids (TDS)	< 200ppm
2	PH	7.0 ± 0.2
3	Turbidity	NIL
4	Color	NIL
5	Hardness	< 50ppm

RO PLANT OPERATING CONDITION

Sl. No.	Parameter	Analysis Value
1	Feed Flow Rate	650 Ltr
2	Product Flow Rate	250 LPH
3	Rejest Flow Rate	400 LPH
4	Recovery	35% to 40%

TREATMENT SCHEME

Sl. No.	Description
1	Raw Water Transfer Pump
2	Multi–Grade Filter
3	Activated Carbon Filter
4	Antiscalant Dosing System
5	Micron Filter ( 20 micron & 5 micron )
6	High Pressure Pump
7	RO Module (Membrane & Membrane Housing)
8	Flushing/Cleaning System,Products (Pure) Water Storge Tank (By Client)

The end water quality is achieved subject to:

Feed quality should be same as required. In case of any change in the quality of raw water, the same may have an implication on the operating parameters and End-Water quality of the system.
Feed limiting an implication on the operating Para meter and end water quality of the system
Feed limiting condition is to be strictly maintained and operation of the water treatment plant should be strictly followed in totality as per the operating manual and instructions.

TECHNICAL SPECIFICATION

1. Raw Water Transfer Pump:
Quantity Required	One
Material of Construction	CI
Make of Material	Kirloskar/c.g
2. Multi-Grade Filter:
Quanitity Requires	One
Sixe of Unit Dia X Ht	13" X 54"
Material of Construction	FRP
Max. Pressure Drop	0.5Kg/cm²
Floe Control	Top Mounted multi port valve
Media	Graded silex anthracite & sand
Vessel make	Water Life/ Aventurs/ roosh
3. Activated carbon Filter:
Quanitity Requires	One
Sixe of Unit Dia X Ht	13" X 54"
Material of Construction	FRP
Max. Pressure Drop	0.5Kg/cm²
Floe Control	Top Mounted multi port valve
Media	Activated Carbon
Vessel make	Water Life/ Aventurs/ roosh
4. Antiscaling Dosing System:
Tank	One
Capacity of Tank	100 Ltr
MOC of Tank	HDPE
5. Dosing Pump:
Quantity required	One
Type	Diaphragm Type Electronic Pump
Capacity	0.5 LPH
Make	E-dose
6. Micron Filter:
Quantity requires	2
Type	Disposable Cartridge
Operation Rate	1.0m³/hr
Operation Pressure	2.5Kg/cm²
Micron Rating	5 micron
Type of Cartridge	PP Wound
MOC	PP
7. High Pressure Pump:
Quantity required	One
Operating flow rate	7.5m³/hr
Operating pressure	10 – 12 Kg/cm²
Make of pump	cri./raj
Type of drive	single phase
8. RO Membrane:
Quantity required	One
Dimension	Dia 4″, Length 40″
Working Pressure	180 psi
Element	Spiral Wound Membrane
Make	Filmtech Dow (USA), super flow (USA)
9. Electrical Control Panel
Quantity required	One
MOC of Pump	1 HP
Material of construction	MS skid mount
Electrical components make	L&T/Siemens/Havell’s./CAURAM
10. Flushing Cleaning System: Connected from feed pump
Quantity required	One
MoC of pump	1 HP
Capacity	1.5m³/hr at 2.5Kg/cm²
UPVC Fitting	1 Lot

INSTRUMENTS :

Pressure Gauges .2 (PIC)
Flow meters: 2 Nos. (One reject & one permeate)
Pressure limiting switches: 02 Nos. Line mounted adjustable.

PIPE FITTING: UPVC
SKID: M.S. duly painted/powder coated

EXCLUSIONS
The following are specifically excluded from our scope of work:

All process inputs, utilities such as tube well for water, power supply and distribution system, inlet-outlet piping etc.
Fire fighting equipments.
All civil work including building, shed, foundation, roads, ramps, storage tanks etc.
Warehousing, storage and safe custody of equipment and other plants item received at site.
Temporary power supply during construction and erection of plant.
Effluent treatment.
Any other services/equipment not specifically mentioned.
Model of the plant.

Share your requirements for a quick response!