4*1w Gu10 LED Spotlight Tw Chip

1, Name: 4*1W GU10 LED Spotlight TW Chip
2, Item: QEE-G-0040100-A
3, Type: LED Spotlight
4, Specification:
Selection One:
Rated Wattage: 5W
Lamp holder: GU10
Life: 50000H
Ambient Temperature: -10° C-50° C
Surface Temperature: 60° C
Input Voltage: AC100-240V / 50-60Hz
Lumen: ≥ 288
Color Rendering Index: ≥ 70
CCT: 2800-3200K
Bean Angle: 15° \25° \40° \60°
Selection Two:
Rated Wattage: 5W
Lamp holder: GU10
Life: 50000H
Ambient Temperature: -10° C-50° C
Surface Temperature: 60° C
Input Voltage: AC100-240V / 50-60Hz
Lumen: ≥ 308
Color Rendering Index: ≥ 70
CCT: 4000-4500K
Bean Angle: 15° \25° \40° \60°
Selection Three:
Rated Wattage: 5W
Lamp holder: GU10
Life: 50000H
Ambient Temperature: -10° C-50° C
Surface Temperature: 60° C
Input Voltage: AC100-240V / 50-60Hz
Lumen: ≥ 336
Color Rendering Index: ≥ 70
CCT: 5500-6500K
Bean Angle: 15° \25° \40° \60°
5, Features:
1. High p5.3er LED spotlight
2. Low-light failure,
3. Unique cooling system
4. High power LED, high brightness
5. Lower consumption
4*1W GU10-: QEE-G-0040100-A(62*68)LED Spotlight
1. High-Brightness LED Lamp: Low-light failure, the work of 35, 000 hours Luminous flux can be maintained at above 75%.
2. High standard of security protection: 4000V high voltage test by the European Union. Drive circuit is isolated switching circuit, to ensure safety.
3. Unique cooling system: Aluminum shell of effective dissemination of internal heat. But also of overheat and overvoltage and overcurrent protection
6, Advantages:
Long Lifespan
Long life: 50, 000 hours.
Environmental protection, energy saving
The features of super-power saving, low cost, low power, long life have an absolute advantage in saving maintenance Costs.
Superior ability to adapt to the environment
Indoor, outdoor, at -40° C-65° C, humidity≤ 65%, can be normal safe operation
Durable and reliable
No tungsten wire, the possibility of a small scrap of non-normal, extremely low maintenance costs.
Wide input voltage range AC86-AC265V
Safety
The drive circuit is isolated switching circuit, to ensure safety.
Quality Assurance
Operation current is constant. Constant current power supply, no strobe.
A unique cooling system
Aluminum shell can effectively disseminate internal heat, and have overheating and overvoltage And overcurrent protection.
Safety instructions
Instructions for use
Input voltage AC86-AC265V, can only be installed to the lamp inside of E27, this product does not have the waterproof
Function. Indoor use, or suitable to waterproof lamps inside. Does not have waterproof function.
Twist does not need tools. Can not use a lot of effort to twist.
Please do not use in high temperature situations. When the temperature is too high, over-temperature control circuit starts, the output will be cut off, light off a few minutes, the temperature
Was lowered to normal.
7, Notes
After opening package must be carefully examined to see if there is damage. If there is damage,
Then notify the supplier immediately, do not use damaged lights.