Listing ID #3669647
Company Information
Ask for more detail from the seller
Contact Supplier
setpoint and process both are displayed simultaneously. the process display is 12.5mm height.
the setpoint display is 8mm height. the power supply is 90-260 vac.
notes
1. on-off control: relay is on upto the set temperature and cuts off at the set point. system temperature will come down and again relay will go on at temperature 2 °c below the set point. same function is repeated. adjustable dead band is provided for specific application. time-proportionating control : relay will be on and off in band of ±2 °c of set-point. on-off : time will adjust as per the heat requirement of the system. of course total time cycle will be of 15 seconds.
2. 4½ digit temperature indicator/controller nippon 2020a.
3. contact factory for supply volts of 90 - 260 vac & retransmission output
principle : input signal is signal conditioned, linearised and amplified. it is compared with the set point and accordingly relay operates.
| inputs : j,k,r,s,t and other thermocouples, r.t.d's like pt-50, pt-100 (2~3 wire), 0-1vdc, 4-20 ma... etc. |
| range, indicating : refer table - a |
| accuracy, resolution ambient compensation: automatic |
| setting : by push button - coarse/fine pots or by membrane key - trimpot |
| setting accuracy : better than 0.2% |
| output : relay contacts rated at 230v/6a. |
| control : on-off or time-proportional (refer note on back side) |
| sensor open protection: built-in indicates ' 1', relay cuts-off. |
| ambient temperature: 0-55 °c |
| supply : 230 vac ±10%, 50 hz standard, 90-260 vac on request. |
| box size : 96 (h) x 96 (w) x 180 (d) or 72 (h) x 72 (w) x 110 (d) or 48 (h) x 48 (w) x 100 (d) in mm |
| note : 24 vdc for loop power 4-20 ma input on re |
| Model No. | Sensor | Range | Calibration Accuracy | Resolution °C / °F |
| nippon 2020A | Pt-100 (2,3 wire) | -100.0 to 600.0 °C -148.0 to 1112.0 °F | 0.25% | 0.1 |
| nippon 2020 | Pt-100 | -100.0 to 199.9 °C -148.0 to 199.9 °F | 0.25% | 0.1 |
| nippon 2020 | Pt-100 | -100 to 600 °C -148 to 1112 °F | 0.25% | 1 |
| nippon 2020 | Iron/Constantan (J) | -100 to 600 °C -150 to 1112 °F | 0.10% | 1 |
| nippon 2020 | Chromel/Alumel (K) | -80 to 1200 °C -112 to 1999 °F | 0.70% | 1 |
| nippon 2020 | Pt/Rh (R,S) | +900 to 1600 °C +1652 to 1999 °F | 0.50% | 1 |
Nature of Business
Manufacturer / Exporter / Supplier / Retailer
Number of Employees
150 - 200
Year of Establishment
2004
Connect with us
For Buyer 
For Seller 
Help 
