6 Heads Wood Sawdust Pallet Block Machine

6 Heads Wood Sawdust Pallet Block Machine Introduction  Equipment disposition: Generally four hot presses are a production line, must provide the dryer, the glue mixer machine and air flow dryer each.1)Crusher:If the material log is bigger than 5*5mm,smaller than 200mm,there is necessary to crush the material into 5*5mm for the further processing.2)Dryer machine:If the material's moisture is above 15%,the drying machine is needed to dry the moisture under 15% before mixing the material with glue.The productivity can be designed as the customer's need.3)Glue mixer:Use the glue mixer to mix the material with glue.4)Hot presss machine:Use the hot press machine to make the wood pallet block. The 6 Heads Wood Sawdust Pallet Block Machine is used to turn the wood waste such as sawdust, wood wools into the pallet feet which is for the transportation pallet. The final product could get the E1 grade.The pallet feet could be solid without hole in the center, also could be hollow.Besides, you could customize the mold for other shape wood waste compressed products.Block sizes could be customize from 75 mm to 145 mm. And the usual sizes are 90*90 mm, 90*100 mm, 100*100 mm,80*90 mm. Automatic Wood Pallet block Production LIne1. Crushing the wood, branch, wood waste into sawdust, wood shavings or wood wools (or you have the raw material already)2. Drying the raw material to 8% (solid block) or 10%(hollow block)3. Mixing the raw material with glue4. Pressing them in the wood pallet block