Standard VRLA AGM Battery, Voltage : 6V, 12V

Listing ID #4049873

Get Latest Price

Voltage6V, 12V
SeparatorHighly porous glass micro-fibre separator, optimized for low internal resistance, for maximum absorption of the electrolyte, and for electrical separation
TechnologyValve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
ContainerStandard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Supply Type Manufacturer, Exporter, Supplier

Preferred Buyer From : All over the world

View More Details

Send Enquiry

Product Details

Voltage 6V, 12V
Electrolyte Dilute sulfuric acid (Specific gravity = 1.300)
Separator Highly porous glass micro-fibre separator, optimized for low internal resistance, for maximum absorption of the electrolyte, and for electrical separation
Ah Rating For 6V:160Ah to 300Ah C10.For 12V:12Ah to 230Ah C10. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.80V.
Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
+ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy, optimized for high corrosion resistance
-ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy, optimized for high corrosion resistance

Salient Features

Thick positive plate design and high Tin alloy which gives a 10-year design life @ 25°C
Advanced Pb-Ca-Tin alloy which reduces grid corrosion and increases battery life
Operation at a low internal pressure
Heavy duty insert copper terminals for ease of assembly, reduced maintenance, and increase safety
Over-sized, through-the-partition inter-cell welds which provide low resistance connections, with minimal power loss
Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924
Multi-cell design for ease of installation and maintenance

A – The terminal voltage for “ST-6” models is 6V, while that for “ST-12” models is 12V.

B – Ah rating is measured @ 25°C with end voltage per cell (EVPC) = 1.80V. The actual battery performance may be ±5% of the figures shown above.

C – SCC means Short Circuit Current and its unit is Amperes.

D – IR means Internal Resistance and its unit is milli-ohms.

E – TT means Terminal Type.

F – Actual dimensions may vary by ±1%.

Float Voltage

Float Voltage Range	:	2.25 to 2.30 VPC @ 25°C
Recommended Float Voltage	:	2.27 VPC @ 25°C
Equalize Voltage	:	2.35 VPC for 12 hours

Charging Instructions

Constant voltage charging is recommended.

Temperature compensation to be applied for temperatures ranging from 0°C to 40°C is as follows: subtract 3mV / °C / cell above 25°C (add 3mV / °C / cell below 25°C).

Model^A	Ah Rating^B					SCC^C	IR^D	TT^E	Dimensions^F (mm/inch)			Weight
	C5	C8	C10	C12	C20				Length	Width	Height	Kg (lb)
ST-6160	141.0	153.0	160.0	163.0	179.0	4700	2.4	F-M8	298 (11.73)	172 (6.77)	230 (9.05)	26.0 (57.3)
ST-6180	159.0	172.0	180.0	183.0	200.0	4800	2.0	F-M8	306 (12.04)	168 (6.61)	225 (8.85)	28.7 (63.3)
ST-6200	177.0	191.0	200.0	204.0	222.0	5400	1.8	F-M8	320 (12.59)	173 (6.81)	230 (9.05)	31.0 (68.4)
ST-6230	204.0	221.0	230.0	235.0	255.0	5600	1.5	F-M8	323 (12.71)	178 (7.00)	230 (9.05)	33.5 (73.9)
ST-6300	266.0	288.0	300.0	307.0	333.0	6500	1.4	F-M8	295 (11.61)	178 (7.00)	365 (14.37)	47.0 (104.0)
ST-1226	22.9	25.2	26.0	27.0	29.0	1100	8.5	F-M6	174.5 (6.87)	165 (6.50)	125 (4.92)	9.3 (20.5)
ST-1240	35.2	38.4	40.0	40.7	42.6	1600	6.5	F-M6	174 (6.87)	163 (6.41)	154 (6.06)	12.6 (27.7)
ST-1245	39.7	43.3	45.0	45.9	48.0	1800	5.8	F-M6	196 (7.72)	163 (6.42)	174 (6.85)	14.2 (31.3)
ST-1255	48.5	52.9	55.0	56.1	62.1	1900	5.6	F-M6	228 (8.97)	137 (5.39)	215 (8.46)	17.5 (38.6)
ST-1265	57.1	62.5	65.0	66.1	72.0	2000	5.2	F-M6	348 (13.70)	167 (6.57)	178 (7.01)	21.5 (47.4)
ST-1270	61.5	67.3	70.0	71.2	77.5	2100	5.0	F-M6	259 (10.19)	167 (6.57)	215 (8.46)	21.5 (47.4)
ST-1280	70.7	76.9	80.0	81.5	88.7	2400	4.5	F-M6	259 (10.19)	167 (6.57)	215 (8.46)	23.7 (52.3)
ST-12100	88.4	96.3	100.0	101.8	110.8	2700	3.7	F-M6	332 (13.07)	173 (6.81)	215 (8.46)	30.0 (66.0)
ST-12110	97.3	106.0	110.0	112.0	122.0	3000	3.4	F-M6	332 (13.07)	173 (6.81)	215 (8.46)	33.0 (72.6)
ST-12120	107.0	116.0	120.0	134.0	135.0	3300	3.1	F-M6	408 (16.06)	173 (6.81)	227 (8.93)	35.0 (77.2)
ST-12150	133.0	143.0	150.0	153.0	166.0	4200	2.5	F-M8	480(18.89)	170 (6.69)	240 (9.44)	45.0 (99.2)
ST-12160	141.0	153.0	160.0	163.0	179.0	4700	2.0	F-M8	530 (20.86)	209 (8.22)	220 (8.66)	52.2 (115)
ST-12230	204.0	221.0	230.0	235.0	255.0	5900	1.5	F-M8	530 (20.86)	269 (10.59)	215 (8.46)	70.0 (155)

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Company Details

Cenergy MaxPower was incorporated in January 2011 to provide Supply Chain Solutions to Offshore Oil and Gas (O & G) and Marine Asset Owners including Shipyards. Cenergy represents leading Original Equipment Manufacturers (OEMs) that have specialized in offering products for the above industries, and provides all the necessary on-site technical assistance including installation and commissioning services.