9" Dual Core Tablet PC

Introduction:
   3onedata fiber-optic video transceivers SWV60400 series can simultaneously transmit 4 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

Specifications: 
Technical Specification

• Video channelsï¼ï¿½4 channels
• Video bandwidthï¼ï¿½8 MHz
• Automatic compatible video systemï¼ï¿½PAL, NTSC, SECAM
• Video input/output impedanceï¼ï¿½75 Ω(unbalance)
• Video signal-to-noise ratioï¼ï¿½≥67dB
• Differential gainï¼ï¿½(10%-90%APL) DG <1% ( typical value)
• Differential phaseï¼ï¿½(10%-90%APL) DP <0.7° ( typical value)
• Video connectorï¼ï¿½BNC

Fiber-optic Specification

• F/O connector: FC/ST/SC
• TX ï¼ï¿½Power:-15 ~ -8dBm   Sensitivity :≤-35dBm 
• RXï¼ï¿½Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
• Transmission Distance :20KM (single mode)
• Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)

Specification of custom-made options
1. Data

• Connector: Terminal Blocks
• Encoded type : RS485 / RS422 / RS232 / Manchester
• Data rate : 0 - 400Kbps
• BER:  ≤10-9

2. Audio

• Connector: Terminal Blocks
• Audio input / output impedance :600Ω(Balance/ unbalance)
• Audio input / output voltage :2Vp-p ( typical value)
• Audio input / output level :0dBm ( typical value)
• Video bandwidth:10HZ~12KHZ
• Audio digital encoded bandwidth :24bit
• Audio signal-to-noise ratio: S/N≥95dB  (weighted)

3. Telephone

• Connector: RJ11
• Bandwidth :8KHZ
• Featuresï¼ï¿½Support call-showing function ;support H-F
• Operating mode : Point to point hotline mode / FXS-FXO

4. Ethernet

• Connector: RJ45
• Support mode : Half duplex or Full duplex
• Standardsï¼ï¿½IEEE802.3 
• Data rate : 10M / 100Mbps 
• Bandwidth: 25M

Characteristic

• Dimensions: 19.2(L)×17.3(W)×2.8(H) cm
• Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
• Operating Temperature: -10°C to +65°C
• Storing Temperature: -45°C to +85°C
• Humidity: 0 to 95% non-condensing
• MTBF: ≥10 5 hours

Warranty: 5 years
Approvals: FCC,CE, RoHS approvals

Features:
1.8-bit digitally encoded and non-compression broadcast quality video transmission 
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
3.Support any high-resolution video signal  
4.Automatic compatible PAL, NTSC and SECAM video system 
5.Power supply and other parameter state indication, which can monitor the operation condition of system 
6.Support no-damage regenerative trunk of video 
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required 
8.Special ASIC design
9.Industry-grade of operating temperature from -10°C to 65°C , which is applied to the different working environment
10.Hot-swap function 
11.Stand-alone type or card-type installed in 19"4U rack-mount chassis