A3 Sublimation Paper, Brand Name : OBOOC, Packaging Type : red

1. Printing
- printer setup. In print setup, recommend to select “text and images” and "plain paper" mode
for satisfactory printing results.
- print the wishful pattern first onto transfer paper and leave it to dry for about 10 minutes before transferring.
- cut out the image, leaving a narrow margin of 5 mm around the pattern edges.
2. Transferring
- preheat the heat press machine and set the recommended transfer temperature to 150-165°c.
- peel the base paper from the printed coating, and the coating would remain as a film-like material.
- place the coating onto the textile with the printed (image) side facing upwards.
- put a sheet of isolation paper onto the image, with the glossy side of the isolation paper facing
towards the image.
- transfer for 15-30 seconds and then remove the textile, peel the isolation paper after cooled.
Suggestions:
 had better not to wash the clothing in 24 hours after transferring.
- washing the clothign  in cold or 30-40°c water. Do not wash with strongly alkaline detergents, and no bleach. Avoid rubbing the transferred pattern when hand washing.
- do not wring. Line dry in shade recommended.
- don’t dry-clean.
In this way, the pictures on the clothing or textiles will be kept well for a longer time.