Laxmi En-Fab Pvt. Ltd. is leading manufacturer of Autoclaved Aerated Concrete (AAC) Plant. AAC Plant is designed for manufacturing AAC Blocks, AAC Blocks is a unique and excellent type of building materials due to its superb heat, fire and sound resistance. AAC block is lightweight and offers ultimate workability, flexibility and durability.
AAC Equipment
.
1. Flyash: get dry ash from power plant
2. Cement: cement in bulk
3. Lime, gypsum and aluminum powder (buy in local area)
The AAC block factory drawing
Water, electricity and steam supply:
1. Water supply: build a well or use waste water
2. Electricity supply: install a 315kv transformer
3. Steam supply: install a 4tons boiler to supply steam to autoclave and curing room
AAC block machine product quality and specification
Quality
We produce according to PRC standard GB11968-1997 “Aerated Autoclaved Concrete Block Technology”.
1. Capacity category: 500, 600, 700kgs m3 (namely 3.5, 5.0, 7.5 Grade)
2. Compression strength level: 3.5, 5.0, 7.5Mpa (namely 3.5, 5.0, 7.5 Grade)
3. Drying shrinkage: ＜0.8mmm
4. Thermal system: 0.11-0.22kcalm.h.centigrade
5. Sound insulation value: 47.45db
AAC block Specification
Length: 600mm
Width: 100 125 150 200 250 300mm
Height: 150 200 250 300mm
Main technical parameters
a. Product capacity should be controlled around 650kgsm3
b. Annual production capacity: 100,000 m3
c. Material ratio: cement 5%, lime 15%, flyash 75%, gypsum 4-5%, aluminum powder 500gm3
d. Water and material ratio: 0.63:1
e. 2.88m3mould
f. Period: 5-6 minutes
g. Curing time: 1.5-2.5 hours at 50-60℃
~h. Autoclave: 6-8 hours
AAC block Main Advantage
a. Without any exhaust gas or waste residue, AAC block production process is in accordance with national environmental protection policy.
b. There is dedusting system for boiler gas and dust disposal which meets the requirement of smoke prevention and dust control.
c. Lime grinding workshop and material matching system will produce some dust. Technologically, dust collector is used to promote production environment and working condition.
d. Waste water produced and condensate water from ball mill machine can be recycled and reused. And acoustic treatment should be taken to reduce noise produced by ball mill machine.
e. Plant trees and grass around the new plant to beautify the environment.
Land investment: it depends on practical situation
AAC block machine produced by this production line are new light weight wall material. As the focused developing product, AAC block plays a great and main role in the national wall material innovation. We highly suggest our clients choose it according to their practical situation.

Laxmi En-Fab Pvt. Ltd. is leading manufacturer of Autoclaved Aerated Concrete (AAC) Plant. AAC Plant is designed for manufacturing AAC Blocks, AAC Blocks is a unique and excellent type of building materials due to its superb heat, fire and sound resistance. AAC block is lightweight and offers ultimate workability, flexibility and durability.
AAC Equipment
.
1. Flyash: get dry ash from power plant
2. Cement: cement in bulk
3. Lime, gypsum and aluminum powder (buy in local area)
The AAC block factory drawing
Water, electricity and steam supply:
1. Water supply: build a well or use waste water
2. Electricity supply: install a 315kv transformer
3. Steam supply: install a 4tons boiler to supply steam to autoclave and curing room
AAC block machine product quality and specification
Quality
We produce according to PRC standard GB11968-1997 “Aerated Autoclaved Concrete Block Technology”.
1. Capacity category: 500, 600, 700kgs m3 (namely 3.5, 5.0, 7.5 Grade)
2. Compression strength level: 3.5, 5.0, 7.5Mpa (namely 3.5, 5.0, 7.5 Grade)
3. Drying shrinkage: ＜0.8mmm
4. Thermal system: 0.11-0.22kcalm.h.centigrade
5. Sound insulation value: 47.45db
AAC block Specification
Length: 600mm
Width: 100 125 150 200 250 300mm
Height: 150 200 250 300mm
Main technical parameters
a. Product capacity should be controlled around 650kgsm3
b. Annual production capacity: 100,000 m3
c. Material ratio: cement 5%, lime 15%, flyash 75%, gypsum 4-5%, aluminum powder 500gm3
d. Water and material ratio: 0.63:1
e. 2.88m3mould
f. Period: 5-6 minutes
g. Curing time: 1.5-2.5 hours at 50-60℃
~h. Autoclave: 6-8 hours
AAC block Main Advantage
a. Without any exhaust gas or waste residue, AAC block production process is in accordance with national environmental protection policy.
b. There is dedusting system for boiler gas and dust disposal which meets the requirement of smoke prevention and dust control.
c. Lime grinding workshop and material matching system will produce some dust. Technologically, dust collector is used to promote production environment and working condition.
d. Waste water produced and condensate water from ball mill machine can be recycled and reused. And acoustic treatment should be taken to reduce noise produced by ball mill machine.
e. Plant trees and grass around the new plant to beautify the environment.
Land investment: it depends on practical situation
AAC block machine produced by this production line are new light weight wall material. As the focused developing product, AAC block plays a great and main role in the national wall material innovation. We highly suggest our clients choose it according to their practical situation.