Acoustic Panel for Studio room, music room

Description:
Groove Wooden Slats have longitudinal grooves and slats, Grooved acoustic panel machined along the length of the panel. The base core board is an 12 mm, 15 mm, 18 mm thick Fiberboard sheet with a finish laminated to its front face and black acoustic felt adhered to its rear face. These panels are consisting of a laminate finished surface, base core board and black acoustic felt attached on the back. The groove acoustical Slats consist of panels made from acoustical fiber boards with linear perforations for excellent uniformity. These panels can be place with 50 mm thick acoustic insulation backing which will enhance acoustic properties of entire system. The groove wooden slats Materials based on acoustic theory, remarkable sound-absorbing function, middle and low frequency sound-absorbing effects especially renowned.
Feature:
1. According to the acoustic principle and reasonable collocation, Acoustic Panel has excellent sound absorbing function, especially in the medium and high frequency range.
2. Contrast to traditional acoustic materials, Acoustic Panel has a longer service life and lower cost to maintain
3. Applied with keel and notch insertion structure, Acoustic Panel is easy and convenient to install.
Mounting system:
Suitable for walls and ceilings, the mounting system is tongue and groove. The linear joins are invisible and the traversal are almost invisible as Tessa joins and large dimension plates are used. The roof assembly must be taken special care to ensure cross-linked of aluminium structure. When practicable areas are required, they should be taken in consideration at the moment of the installation.