Air Pressure Regulators are ideally designed for precise controlling of the air pressure on the downstream side of the regulator. All pneumatic instruments require pressure regulators to supply them air at constant pressure. Our Adjustable Air Pressure Regulators have a proven track record in various industries for their performance and appreciated for their small size, high air volume and low cost. Universal Mounting is an added quality of your regulators. Our standard material of construction is mentioned below but we can make regulators in any material composition as per customer̢۪s requirement. Moreover, our company is counted as one amidst the prominent Compressor Air Pressure Regulator Manufacturers, based in India.

• A bonnet which houses the adjusting stem and loading spring. The locking nut is provided on the loading stem and prevents accidental change of the regulator knob setting.
• A centre ring containing the pilot stem and the supply and exhaust port.
• An end cap which holds the cleaning plug for removing dirt and sediments.

• Durable corrosion resistance materials are used throughout this device. The bonnet is cast Aluminum, the loading spring is cadmium plated, the pilot stem is bright bar special quality and has a Teflon valve seat. The diaphragm is a neoprene coated fiber glass material for maximum resistance to stretching which ensures minimum drift.

• Clockwise turning of the adjusting screw increases the pressure. To reduce the pressure, turn the adjusting screw anticlockwise.

• With clean air supply the regulator will give long uninterrupted service. Faulty air regulator working or loss of regulation is usually due to dirt in the disk area. Cleaning of this area will ensure good working again.
• For cleaning remove bottom plug and spring and clean disk with denatured alcohol. Wipe off seat and blow out body with compressed air. Re-assemble the parts of the unit and put regulator in operation.

• The unit is suitable for pipe in line and flush mounting.

• Maximum Inlet Pressure : 150 PSI
• Reduced Output Pressure : 0 to 40 PSI
• Use : With all pneumatic instruments
• Model Number : SEPR-01

Air Pressure Regulators are ideally designed for precise controlling of the air pressure on the downstream side of the regulator. All pneumatic instruments require pressure regulators to supply them air at constant pressure. Our Adjustable Air Pressure Regulators have a proven track record in various industries for their performance and appreciated for their small size, high air volume and low cost. Universal Mounting is an added quality of your regulators. Our standard material of construction is mentioned below but we can make regulators in any material composition as per customer̢۪s requirement. Moreover, our company is counted as one amidst the prominent Compressor Air Pressure Regulator Manufacturers, based in India.

• A bonnet which houses the adjusting stem and loading spring. The locking nut is provided on the loading stem and prevents accidental change of the regulator knob setting.
• A centre ring containing the pilot stem and the supply and exhaust port.
• An end cap which holds the cleaning plug for removing dirt and sediments.

• Durable corrosion resistance materials are used throughout this device. The bonnet is cast Aluminum, the loading spring is cadmium plated, the pilot stem is bright bar special quality and has a Teflon valve seat. The diaphragm is a neoprene coated fiber glass material for maximum resistance to stretching which ensures minimum drift.

• Clockwise turning of the adjusting screw increases the pressure. To reduce the pressure, turn the adjusting screw anticlockwise.

• With clean air supply the regulator will give long uninterrupted service. Faulty air regulator working or loss of regulation is usually due to dirt in the disk area. Cleaning of this area will ensure good working again.
• For cleaning remove bottom plug and spring and clean disk with denatured alcohol. Wipe off seat and blow out body with compressed air. Re-assemble the parts of the unit and put regulator in operation.

• The unit is suitable for pipe in line and flush mounting.

• Maximum Inlet Pressure : 150 PSI
• Reduced Output Pressure : 0 to 40 PSI
• Use : With all pneumatic instruments
• Model Number : SEPR-01