Listing ID #5674570
Company Information
Ask for more detail from the seller
Contact SupplierThe chemical composition of AISI 1015 carbon steel is outlined in the following table.
Element | Content (%) |
---|---|
Iron, Fe | 99.13-99.57 |
Carbon, C | 0.13-0.18 |
Manganese, Mn | 0.30-0.60 |
Sulfur, S | ≤ 0.050 |
Phosphorous, P | ≤ 0.040 |
Physical Properties
Properties | Metric | Imperial |
---|---|---|
Density | 7.87 g/cc | 0.284 lb/in³ |
Mechanical Properties
The mechanical properties of the cold drawn AISI 1015 carbon steel are displayed in the following table.
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 385 MPa | 55800 psi |
Yield strength | 325 MPa | 47100 psi |
Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
Shear modulus (typical for steel) | 80.0 GPa | 11600 ksi |
Elastic modulus | 190-210 GPa | 27557-30458 ksi |
Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
Elongation at break (In 50 mm) | 0.18 | 0.18 |
Reduction of area | 0.4 | 0.4 |
Hardness, Brinell | 111 | 111 |
Hardness, Knoop (converted from Brinell hardness) | 129 | 129 |
Hardness, Rockwell B (converted from Brinell hardness) | 64 | 64 |
Hardness, Vickers (converted from Brinell hardness) | 115 | 115 |
Machinability (based on AISI 1212 steel as 100 machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing.) |
60 | 60 |
Thermal Properties
The thermal properties of AISI 1015 carbon steel are given in the following table.
Properties | Metric | Imperial |
---|---|---|
Thermal expansion co-efficient (@0.000-100°C/32.0-212°F) | 11.9 µm/m°C | 6.61 µin/in°F |
Thermal conductivity (estimated based on similar materials) | 51.9 W/mK | 360 BTU in/hr.ft².°F |
Other Designations
Equivalent materials to AISI 1015 carbon steel are listed in the following table.
AMS 5060 | ASTM A29 | ASTM A510 | ASTM A512 (1015, MT 1015) | ASTM A830 |
---|---|---|---|---|
ASTM A519 (1015, MT 1015) | ASTM A545 | ASTM A549 (1015) | ASTM A575 (M1015) | ASTM A576 |
ASTM A635 | ASTM A659 (1015) | ASTM A787 (MT 1015) | ASTM A794 | ASTM A513 (MT 1015) |
SAE J1397 | SAE J403 | SAE J412 | SAE J414 | ASTM A108 |
FED QQ-S-698 (C1015) | MIL SPEC MJL-S-16974 |