Screwed Flanges Manufacturer in Mumbai Maharashtra India

Screwed Flanges for Heavy Oil Processing - ASME B16.5

Minimum Order Quantity : 500 Piece
Sold By : Niton Metal and Alloys

Product Specifications

GradeASME B16.5
ApplicationHeavy Oil Processing, Petrochemicals, Vehicle Sector
Country of OriginIndia
Weight Rating400# And Up
FinishingPolished
Raised Face Height1/16
Face TypeRaised Face, Level Face, RTJ
Connection TypeScrewed
IndustryOil And Gas, Petrochemical
UsageHigh Pressure Applications
Supply TypeManufacturer, Exporter, Supplier

Preferred Buyer From : All over the world

Product Overview

ASME B16.5 Threaded/Screwed Flanges are open in raised face, level face, or RTJ going toward. Decisively when a raised face is head for Threaded line Flanges, the standard height is 1/16" for Threaded line Flanges under 400#. For Strung line Flanges of 400# and up, the standard Threaded line Flanges raised face level is 1/4". A105 Threaded/Screwed Flanges are as reliably as possible used for little width, high weight essentials. Stainless Steel Threaded/Screwed Flanges with a middle have surrounded central habitats that reach from 1/2" through 24".

ASME B16.5 Threaded/Screwed Flanges Manufacturers in India. We are making Threaded Flanges, Threaded/Screwed Flanges pn16 and Strung Diminishing Flanges sufficiently due to reasonable master hours in India and noteworthy wellspring of astounding npt Threaded Flanges, most ideal situation, cost open in Mumbai, India. Tolerating that not all total irritation check Threaded/Screwed Flanges Aspects Graph going before buying Threaded/Screwed Flanges Minimizer, We have organized flawlessly of Threaded/Screwed Flanges Connector, Threaded/Screwed Flanges Bushing and Threaded/Screwed Flanges Association in our stockyard in any size range. Threaded Flanges Application in Weighty oil arranging plants, Petrochemicals and acids, Vehicle Area.

Specification

ASME B16.5 Threaded Flange Size Chart	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Threaded Lap Joint Flange Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Npt Threaded Flanges Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Slip On Threaded Flange
Square Threaded Flange Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Npt Threaded Flanges
JIS	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Square Threaded Flange
UNI	6Bar 10Bar 16Bar 25Bar 40Bar Threaded Lap Joint Flange
EN	6Bar 10Bar 16Bar 25Bar 40Bar Screwed Flange
Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types of Screwed Pipe Flange	Forged / Threaded / Screwed / Plate
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Production technique	Forged, Heat treated and machined
Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations
Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Origin	Indian / West Europe / Japan / USA / Korean
Manufacturer of	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. Npt Threaded Flanges: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 Screwed Flange The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Threaded Lap Joint Flange Uses & application	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Export to	Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc

Interested in this product? Ask for more details & Latest Price from seller

Send Inquiry

Company Overview

Manufacturer Of EN 1A Steel Round Bars, EN 24 Steel Round Bars, Slip On Flange, EN 19 Steel Round Bars, EN 8 Steel Round Bars, 304 Stainless Steel Round Bars, 309 Stainless Steel Round Bars, 316 Stainless Steel Round Bars, 317 Stainless Steel Round Bars, 347 Stainless Steel Round Bars, 904L Stainless Steel Round Bars, S31803 Duplex Steel Round Bars, S32205 Duplex Steel Round Bars, S32750 Duplex Steel Round Bars, S32760 Duplex Steel Round Bars.

Share your requirements for a quick response!