Listing ID #4431742
Company Information
Ask for more detail from the seller
Contact Supplier
At Harsh Steel Nickel Alloy X-750/UNS N07752 is available in Inconel X-750 wire, Inconel X-750 Round bar, Inconel X-750 Forged bar, Inconel X-750 hex bar, Inconel X-750 Flat bar, Inconel X-750 Circles, Inconel X-750 Ring, Inconel X-750 Tube, Inconel X-750 seamless Pipe, Inconel X-750 Welded / ERW Pipe, Inconel X-750 Sheet, Inconel X-750 Plate, Inconel X-750 Coil, Inconel X-750 Flanges, Inconel X-750 fasteners, Inconel X-750 Socket weld Fittings, Inconel X-750 ferrule fittings, Inconel X-750 Buttweld fittings Like cap, elbow, tee, Reducer.
Inconel X-750 is a nickel-chromium alloy which has been made precipitation-hardenable by the increments of aluminum and titanium. Inconel X-750 has great resistance to erosion and oxidation along high tensile and creep break properties at temperature up to 1300ºf (700ºc). Because of X-750's great unwinding safety it is helpful for applications as high-temperature springs and fasteners, X-750 is likewise utilized as a part of gas turbines, rocket engines, atomic reactors, weight vessels, tooling and airplane structure.
Sheet, Strip and Plate are available with the following heat treatments
| Alloy Name | Trade Name | UNS No. | American Specs | German Specs |
| Alloy X750 | Inconel X750 | UNS N07750 UNS N07752 |
AMS 5542 Sheet, Strip and Plate AMS 5582 Seamless Tube AMS 5583 Seamless Tube AMS 5747 Bar and Forgings AMS 5779 Welding Electrodes AMS 5598 Sheet, Strip and Plate AMS 5667 Bar and Forgings AMS 5668 Bar and Forgings AMS 5669 Bar AMS 5670 Bar and Forgings AMS 5671 Bar and Forgings AMS 5698 Wire AMS 5699 Wire |
Werkstoff 2.4669 |
| Chemical Composition Limits | ||||||||||||
| Weight% | Ni +(Co) | Cr | Fe | Ti | Al | Nb + (Ta) | Mn | Si | S | Cu | C | Co |
| Nickel Alloy X-750 UNS N07750 |
55.0-59.0 | 19.0 -22.5 | 7.0-9.5 | 2.75-4.0 | 1.0-1.7 | 0.35 max | 0.03 max | 0.35 max | 0.20 max | 0.015 max | 0.010 max | Rem |
| UNS N07752 is available in billets for forging. UNS N0772 has limits of 0.05% on both Carbon and Cobalt | ||||||||||||
| Material | Size | Ultimate Tensile Strength ksi | Yield Strength (0.2% Offset) Ksi | Elongation in 4D(%) | % Reduction of Area |
| Inconel X-750 Bar | Under 4.0" | 165 | 105 | 20 | 25 |
| Inconel X-750 Bar | 4.0 " and over | 160 | 100 | 15 | 17 |
| Properties as described in AMS 5667 which requires that material following 1625°F/24 hrs, AC-Equalising + precipitation treatment have the following minimum room temperature properties. Hardness will lie in the range of 302-363 BHN | |||||
| Material | Size | Tensile Strength ksi | Yield Strength (0.2% Offset) Ksi | Elongation in 2"(%) | % Hardness Rc |
| Inconel X-750 Sheet Annealed Condition |
0.010 to 0.024", incl | 140 max | - | 30 min | - |
| Inconel X-750 Sheet Annealed Condition |
over 0.024 - 0.125" incl | 130 max | 60 max | 40 min | - |
| Inconel X-750 Sheet Annealed Condition |
over 0.125 - 0.250 incl | 130 max | 65 max | 40 min | - |
| Inconel X-750 Sheet After Precipitation Treating (1300°F/20hr, A.C) |
0.010 to 0.025 incl | 165 min | 105 min | 20 min | 32 min |
| Inconel X-750 Plate After Precipitation Treating (1300°F/20hr, A.C) |
0.187 to 4.000, excl | 155 min | 100 min | 20 min | 30 min |
| Material | Size | Tensile Strength ksi | Yield Strength (0.2% Offset) Ksi | Elongation in 2"(%) | % Hardness Rc |
| Alloy X-750 N07752 Type 1 |
160-185 | 100-130 | 20 | 20 | 27-40 HRC |
| Alloy X-750 Heat Treatment - Solution Treat 1.2 hrs @ 1975°F and Air Cool Precipitation Heat Treat 20 hrs @ 1320°F and Air Cool |
|||||
Nature of Business
Manufacturer / Exporter / Service Provider / Supplier / Retailer
Number of Employees
Below 20
Year of Establishment
2006
Connect with us
For Buyer 
For Seller 
Help 
