Antique Flexibond Adhesive

Listing ID #4345927

DESCRIPTION

The ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick. Antique Glass Mosaic Tile Adhesive (white), designed to just mix with water, has a long open time with unsurpassed adhesion and workability.

USES

Excellent for fixing Glass mosaic tiles in exterior and underwater applications like for fixing swimming pool, Terrace, Kitchen, Bathroom.

ADVANTAGES

* Exceeds Shear Bond Strength Requirements.
* Ultimate adhesion for porcelain and glass tiles.
* Superior for exterior and submerged applications.
* High shear bond strength.
* Smooth creamy formula.
* See limitations.

SUITABLE SUBSTRATES

* Concrete / Masonry .
* Concrete block .
* Cement mortar beds .
* Non-water soluble cut-back adhesive*
* Existing ceramic tile and stone.

* Interior use only.
** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.

APPROXIMATE COVERAGE

*55–60sft per 20kg bag with 1/4″ x 1/4″ (6 mm x 6 mm) notched trowel.
*Coverage will vary depending on trowel notch size, type and size of tile and substrate.

SHELF LIFE

Factory sealed containers of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area.
* High humidity will reduce the shelf life of bagged product.

PACKAGING
1kg, 5kg, 20kg bag

Color: White

LIMITATIONS

*Not for use directly over particle board, luan, Masonite® or hardwood floors.
*Adhesives/mastics, mortars and grouts for ceramic tile, pavers, brick and stone are not replacements for waterproofing membranes. When a waterproofing membrane is required, use a Antique Glass Mosaic Tile Adhesive (White) Waterproofing Membrane

Note: Surfaces must be structurally sound, stable and rigid enough to support ceramic/stone tile, thin brick and similar finishes. Substrate deflection under all live, dead and impact loads, including concentrated loads, must not exceed L/360 for thin bed ceramic tile/brick installations or L/480 for thin bed stone installations where L=span length.

CAUTIONS

Consult MSDS for more safety information.
*Some marbles and other stone have low flexural strength and may not be suitable for installation over wood floors.
*During cold weather, protect finished work from traffic until fully cured.
*Contains portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
*Wait 14 days after the final grouting period before filing water features with water at 70°F (21°C)
*DO NOT take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
*Keep out of reach of children.