Asbestos laminated sheets are moulded from asbestos cloth with thermosetting resins and are specially developed for engineering applications. The high content of asbestos, superior grade of....
Asbestos laminated sheets are moulded from asbestos cloth with thermosetting resins and are specially developed for engineering applications. The high content of asbestos, superior grade of binder and special press-curing techniques impart high degree of mechanical strength. These materials are hard wearing, heat resistant and unaffected by a wide range of chemicals and solvents.
Â
  Special Characteristics
Compestos materials do not require specials lubricants. They are compatible with water emulsions, many chemicals and normal lubricating oils, grease, compounds, molybdenum di-sulphide paste etc. Compestos materials are characterised by the following outstanding properties:
Excellent dimensional stability
Good wear and chemical resistance
Low moisture absorption
Very high strength to weight ratio
High temperature resistance
High impact resistance
Excellent irradiation characteristics
Impervious to effects of moisture of marine exposure
Resistant to vermin attack.
These outstanding properties make compestos superior to conventional materials for application involving bearings, wearing pads, gears and other rotating or reciprocating parts.
GRADE LS 30
This is the General purpose laminated Sheet having a dry lubricating incorporated evenly throughout the structure which lowers the co-efficient of friction and imparts self lubricating properties. LS 30 can be effectively used under widely differing conditions, involving:
High surface speed with lighter loads or low speeds with heavy loads,
Parts subjected to high stresses,
Situations where by normal methods is difficult, intermittent or indeed impossible,
Situations where corrosive conditions, electrical conductivity etc. rule out the use of metals.
GRADELS 10
This is a special application Laminated Sheet, having relatively high co-efficient of friction. Grade LS 10 is an Effective replacement for Grade LS 30 where frictional forces are minimum and external lubrication is possible Due  to  its  good  electrical  resistance  and  antistatic  nature,  it  is  used  as  a  flooring  material  in  railways.
APPLICATIONS
Bushes, Bearings, Wear Strips, Centre Pivots, Rubbing Pads, Thrust Washers, Doctor Blades, Compressor Blades and Rotor Blades, Seatings, Guides, Facings, Slides, Valve Discs, Tread Plates, Pump Rings, Impellers and Gears.
RANGEÂ OF SIZES
LS30 and LS10 are both available in sheet size of 1000mm x 1000 mm. and in the thickness range of 3.0 mm to 51.0 mm. Sheet sizes other than 1000mm x 1000mm. can also be supplied if production volume and constraints permit.
Member Since 16 Years
Nature of Business Exporter
For Buyer 
For Seller 
Help 
Masjid Bunder, Mumbai, Maharashtra 
Send Enquiry