Automatic Cement Block Machine, Brand Name : HUIMAC

Automatic multifunctional cement block machine is hydraulic and vibrating equipment, the raw materials for the production is river sand, little stone, slag, shale, gangue, coal ash and so on, can be pressed into block type with some cement together ,then natural curing.
The machine is available for different blocks, wall bricks, color bricks, paving stone, lawn bricks and slope-protecting bricks and other kinds of products.
adopting siemens technology and moulds made of best steel through precision machining, wire-cutting, heat dealing, this machine is durable and a leader in the international market. Meanwhile, it is saving supporting plates because the new product can be stack together, so become a best choice for construction with high quality.
the machine can be installed other kind moulds for production on various of products , such as concrete blocks, rebar blocks, bridge special spacers, cement components, decorates components, european components, zinc alloy stirrups and etc. Therefore , it is a multifunction machine, which can meet many demands and bring you largest profits at small cost.
parameters :
mould box(l*w*h): 690*535*20mm
blocks numbers: 33piece per 200mm
molding cycle: 20 -30 secs
capacity:90000pieces per 200mm(cement supporting)
vibrating frequency: 4500-5100times/min
vibration force :22kn
pipe bending cylinder: 63*300( the diameter of cylinder is 32)
edge oil cylinder: 63*300(the diameter of cylinder is 32)
rated pressure: 6.3mpa
weight:4160kg
overall dimensions: 4000*3500*2300mm
　　the installation and maintenance
　　it is a normal and important working along with daily operation and overhaul, and should be checked by professional clerks.
　　 the maintenance tips:
the lubrication oil must be clean and sealed well, and shoaled be used in following parts of this machine: roller bearing, rotating bearing, all gears, free bearing and plain bearing.
The wheel-tyre may be loose after first installation and need check frequently.
Check all the parts are working smoothly or not.
Check the spare parts and exchange the worn parts in time.
the supporting underframe should be clean in case of accidents happening.
stop to check as soon as the oil temperature increases of the bearing.
Stop to check if a impacting sound while gear rolling
the installation and trial run
installed in a plain concrete place, and fixed by anchor bolts.
Make the machine body is vertical and stable.
Check all the parts after installation finished.
The power wires and control switch should be matched up the motor.
The trial run with no loading then can put into production.