Listing ID #3913399
Company Information
Ask for more detail from the seller
Contact SupplierSr No | Model | Vertical Form/Fill/Seal Machine Model PK-L (Upto 2.5 Kg) | Vertical Form/Fill/Seal Machine Model PK-XL (10 Kg) |
---|---|---|---|
1 | FILLING WEIGHT | 500gms, 1Kg & 2.5Kg | 10 Kg |
2 | POUCH TYPE | C Pillow type pouches having centre seal and fin seal. | C Pillow type pouches having centre seal and fin seal. |
3 | MAX. POUCH SIZE | 350mm (W) x 500mm (Ht) | 400mm (W) x 660mm (Ht) |
4 | PACKAGING | Virgin Films like LDPE MATERIAL (Max. Roll Width : 720mm) | Virgin Films like LDPE MATERIAL (Max. Roll Width : 830mm) |
5 | OUTPUT | For 500gms & 1Kg filling weight– Speed: 17 - 19 pouches/minute. For 2.5Kg filling weight Speed: 8 - 10 pouches/minute |
10kg filling weight -Speed: 3-4 pouches/minute. |
Note:(Speed depends on pouch size, Flow ability, Uniform product size, Moisture Content & Bulk Density of the product and type of the film)
Subject to the following:-
|
|||
6 | WEIGHT ACCURACY | For 500gms, +/- 75gms For 1Kg, +/- 150gms For 2.5Kg, +/- 175gms |
For 10kg +/-500gms |
|
|||
8 | MACHINE CONSTRUCTION | Complete machine construction is of M.S All product contact parts are of S.S.316. | Complete machine construction is of M.S All product contact parts are of S.S.316. |
9 | SEALING METHOD | Impulse Sealing/ Thermoweld Sealing–Virgin Films (Customer to decide the alternative) | Impulse Sealing/ Thermoweld Sealing–Virgin Films (Customer to decide the alternative) |
10 | CHANGE PARTS | Change Parts needed for different grammages/sizes. | Change Parts needed for different grammages/sizes. |
11 | ELECTRICALS | 440/230V, 3 Phase, 50 Hz, AC. | 440/230V, 3 Phase, 50 Hz, AC. |
In case of abnormal fluctuations in voltage and/or frequency, we recommend that you install a voltage stabilizer to feed constant voltage to the machine. | |||
12 | POWER REQUIRED | 3.0 KW | 5.7 KW |
13 | COMPRESSED AIR REQUIREMENT | Model no.: CPM7D/10-200 Type: Tank Mounted Screw Compressor Refrigerated Dryer: With Dryer Capacity (fad) [ cfm ]: 21.2 cfm Max working press [barg]: 10 Motor rating [ hp ]: 7.5 Air Receiver: 200 Ltrs Accessories Set of Filters: 1 Micron & 0.01 ppm |
Model no.: CPM7D/10-200 Type: Tank Mounted Screw Compressor Refrigerated Dryer: With Dryer Capacity (fad) [ cfm ]: 21.2 cfm Max working press [barg]: 10 Motor rating [ hp ]: 7.5 Air Receiver: 200 Ltrs Accessories Set of Filters: 1 Micron & 0.01 ppm |
14 | CONTROLS | Machine is controlled through PLC (Programmed Logic Controller) - Mitsubishi Make | Machine is controlled through PLC (Programmed Logic Controller) - Mitsubishi Make |
15 | TESTING MATERIAL | In case of an order, we request you to send us 2 rolls of packaging material and 50 Kg Of the product for testing to our works, 4 weeks prior to the despatch date. | In case of an order, we request you to send us 2 rolls of packaging material and 50 Kg Of the product for testing to our works, 4 weeks prior to the despatch date. |