R40BA - 40 mm cap.Backgeared Auto feed Radial Drill Machine
Specifications of machine:
Description R40BA
Capacity Drilling In M.S. 40
Drilling in C.I. 45
Tapping in M.S. 20
Rough Boring M.S. 60
Drilling Head Spindle Hole Taper MT-4
Spindle Travel 250
Spindle Speed (RPM x Steps) 88-2600 x 8
Diameter of RAM 78
Spindle Auto feed Range 0.05 & 0.09 MM/REV
Working Range Max / Min Distance Spindle Nose to Base 850/250
Max / Min Distance Spindle Center to
Column
920/385
Max. Drilling Radius 1005
Machine Measurement (L x B x H) 1350 x 850 x 1825
Diameter Of Column 170
Work Table 300 x 300 x 385
Power Drill-Head Motor 1.5 HP/1440 RPM
Elevating Motor 1HP/1440 RPM
Head Motor V-Belt B-47
Lifting Motor V-Belt B-25/B-26
• The All new model 40 mm Back geared Auto feed Radial Drill Machine is meant for heavy
general purpose work.
• It is having heavy duty machine structure having 40 mm capacity in steel & 250 mm spindle
travel.
Dist. From spindle center to column is 900 mm.
• Column of 170mm dia is made of casting having long bottom for greater rigidity to reduce
vibration.
• The base plate is heavily ribbed below for extra rigidity.
• Most important part spindle is internally and externally ground made of EN8 steel.
• Spindle RAM is of 78 mm dia made of steel only not the casting with 250 mm spindle travel.
Pinion of EN8 steel and quill both are having 9 DP heavy teeth.
• Auto feed gears are also hardened.
• All the gears in the machine are supported through good quality bearings and not the
bushes.

R40BA - 40 mm cap.Backgeared Auto feed Radial Drill Machine
Specifications of machine:
Description R40BA
Capacity Drilling In M.S. 40
Drilling in C.I. 45
Tapping in M.S. 20
Rough Boring M.S. 60
Drilling Head Spindle Hole Taper MT-4
Spindle Travel 250
Spindle Speed (RPM x Steps) 88-2600 x 8
Diameter of RAM 78
Spindle Auto feed Range 0.05 & 0.09 MM/REV
Working Range Max / Min Distance Spindle Nose to Base 850/250
Max / Min Distance Spindle Center to
Column
920/385
Max. Drilling Radius 1005
Machine Measurement (L x B x H) 1350 x 850 x 1825
Diameter Of Column 170
Work Table 300 x 300 x 385
Power Drill-Head Motor 1.5 HP/1440 RPM
Elevating Motor 1HP/1440 RPM
Head Motor V-Belt B-47
Lifting Motor V-Belt B-25/B-26
• The All new model 40 mm Back geared Auto feed Radial Drill Machine is meant for heavy
general purpose work.
• It is having heavy duty machine structure having 40 mm capacity in steel & 250 mm spindle
travel.
Dist. From spindle center to column is 900 mm.
• Column of 170mm dia is made of casting having long bottom for greater rigidity to reduce
vibration.
• The base plate is heavily ribbed below for extra rigidity.
• Most important part spindle is internally and externally ground made of EN8 steel.
• Spindle RAM is of 78 mm dia made of steel only not the casting with 250 mm spindle travel.
Pinion of EN8 steel and quill both are having 9 DP heavy teeth.
• Auto feed gears are also hardened.
• All the gears in the machine are supported through good quality bearings and not the
bushes.