MACHINE BASE: Shall be all steel fabricated out of best quality steel and shall have machined facings to support the tables, Top and Bottom spindle assemblies and the Column and shall be very rigid and sturdy.
COLUMN: Shall be all steel fabricated and will carry the upper wheel assembly.
SAW PULLEYS: Will be solid Plate type of castings machined all over and balanced. The faces shall have a slight crown to ensure accurate Saw Tracking. Both the top and bottom pulleys shall be mounted on machined and tapered spindles. The top pulley is lighter than the bottom so that over running will not occur.
PULLEY BEARINGS: The pulley bearings shall be of heavy-duty self-aligning roller type and shall be enclosed in dustproof housings. Each spindle shall be supported by two such bearings, one on each side of the pulley, which is not over hung. The bearings on the top spindle shall be pivoted from fulcrum pins in the jaw piece.

MACHINE BASE: Shall be all steel fabricated out of best quality steel and shall have machined facings to support the tables, Top and Bottom spindle assemblies and the Column and shall be very rigid and sturdy.
COLUMN: Shall be all steel fabricated and will carry the upper wheel assembly.
SAW PULLEYS: Will be solid Plate type of castings machined all over and balanced. The faces shall have a slight crown to ensure accurate Saw Tracking. Both the top and bottom pulleys shall be mounted on machined and tapered spindles. The top pulley is lighter than the bottom so that over running will not occur.
PULLEY BEARINGS: The pulley bearings shall be of heavy-duty self-aligning roller type and shall be enclosed in dustproof housings. Each spindle shall be supported by two such bearings, one on each side of the pulley, which is not over hung. The bearings on the top spindle shall be pivoted from fulcrum pins in the jaw piece.