Bitumen Testing Instruments

We are an established manufacturer, exporter and supplier of Bitumen Testing Instruments in Kolhapur, India. The offered range of Bitumen testing equipment is manufactured keeping in mind the international quality norms and standards and the client requirement. They are equipped with vertical pillar which are mounted on a base provided with few levelling screws. These instruments are used to determine the softening point of bitumen. We provide them as per the specifications of the client as well.

Specifications :

• RSI-212
• Flow Cup Viscometer as per IS : 3944 Made of gunmetal and the orifice is made from stainless steel. A protective skirt is provided at the bottom of the cup to minimize the risk of damage to the orifice.
• Flow cup No.2
• Flow cup No.3
• Flow cup No.4
• Flow cup No.5 and 6

Accessories :

• Stand with leveling screws.
• RSI-213
  
  • Bitumen Sampler A strong metal vessel of about half litre capacity, the handle of which shall be attached by a means not adversely affected by hot bitumen. IS: 1201.

• RSI-214
  
  • Sampling Tube made of metal. Tube suitable for sampling 200 Ltrs. Drum. The rings are soldered to opposite sides o the tube at the upper end for convenience in holding it.

• RSI-215
  
  • Bitumen Penetrometer Hand IS: 1203 BS 2000-49, ASTM D5, AASHTO T49. Consist of Vertical Pillar mounted on a base provided with leveling screws. T
  • he head, together with dial plunder rod and cone (or needle) slides on a pillar and can be clamped at any desired height.
  • A rack and pinion & pointer assembly provides fine adjustment of needle or cone tip to sample.
  • It incorporates a slipping clutch mechanism which makes reading of penetration, and subsequent resetting a simple and accurate operation.
  • The dial is graduated in 400 1/10"' mm sub-divisions, and the red needle pointer against black figures makes for easy reading.
  • Supplied complete with one 50 gram weight, one 100 gram weight and one Needle.

• RSI-216
  
  • Automatic Bitumen Penetrometer Electrically operated with Digital Timer, Penetration Needle, 2 Cups, Weights 50 gram and 100 gram.

Accessories :

• Penetrometer cone : Made of gunmetal and is fitted with a hardened and ground detachable steel tip and a stem. Total moving weight is 150 + 0.01 gram.
• Bitumen Penetration Kit : Consists of Penetration Needle, transfer dish and set of sample containers.

• RSI-217
  
  • Softening Point apparatus (Ring & Ball), IS : 1205, BS2000-58,ASTMD36,AASHTOT53.
  • Used for the determination of the softening point of bitumen. Consists of: Two steel balls; each 9.5 mm in dia. Brass rings Two; tapered of brass. Ball Guide Two Ring Holder One Bath Beaker of heat resistant glass, I.D. 8.5 cms and depth 12 cms approx.

• RSI-218
  
  • Ring & Ball Apparatus, electrically heating Similar to RSI-217, but supplied with a heating plate with an energy regulator which permits fine regulation of temperature.
  • In addition, there is an electrically operated Stirrer mounted on a stand with chuck and glass rod or aluminum rod and for stirring the water in the water bath. Operation on 230 V, single phase, 50 cycles, A.C. supply