Blood Transfusion Set

• Features as follows
(1)Spike：material：PC
(2) Spike protective cap：material：PP
(3) Air vent(Red)：material：PE with 0.25μm pore size of the hydrophobic membrane(4) Drip chamber：material：PVC；Specification：57mm, 20drops/ml
(5) Blood tubular filter：mesh material: medical grade PA6-6；plastic frame：ABS；Specification：φ17.3×52mm
Wire diameter of monofilament：100 ±10μm,Pore size：200±20μm；Filtration rate: shall be no less than 85%
(6) Flow rate: The filter shall deliver no less than 1000ml of blood at(23±2)℃ in 30mins with a pressure difference of 10kPa and it shall also deliver no less than 500ml of blood in 2mins under a pressure difference of 30kPa above atmospheric pressure.
(7)Assembly method：Injection welding
(8)Tube length：1.5m,PVC；tube I.D.:3.0mm,O.D.:4.1mm; the length of short tube: 200mm
(9)Y injection port：Latex
(10)Flow regulator：material：ABS；Specification：57mm ,the pathway can be hung by this exquisite design
(11)Male luer lock connector：ABS with 6:100 luer lock taper conforming to international standard
(12)Protective cap of male luer lock：PP
(13)Hypodermic needle：304 stainless steel, its specification: OD 1.20mm;18G,Pink；its length：38mm(as your specific requirement)
• Options Available
- With or without air vented spike;
- With or without hypodermic needle;
- With or without “Y” injection port:：7 kinds available( latex or latex-free);
- Flow regulator：material：ABS ；48mm、45mm available
- 5 kind of Luer lock connector and 2 kinds of luer slip available