Polyester film coated with silicone adhesive is designed for heat resistance especially for masking during powder coating and also for electrical insulation application. Also used for professional spray painting applications that requires masking, this features a special coated film backing that Possesses good resistance to temperature, solvent and water. This also protects that area from getting wet during sandpapering. Can easily stick on to low energy surfaces, making it suitable for masking for automotive applications, nonferrous Metals, Glass and various surfaces as well as Equipment of rubber or plastic parts. Easy to de-mask without leaving residue.

Features:

• Flexible, wet resistant masking

• Tape with a good tensile strength.

• Residue free removal.

• Easy unwinding for better workability

• Good Initial tack

• Easy Masking and de-masking

• High Shear & Easy De-Masking.

Applications:

• Paint masking.

• Masking gold fingers of printed masking circuit boards.

• Holding application.

• Cable Bundling.

• Masking during Powder coating/Epoxy coating

• Insulation – with BDV of 4.5KV and temp resistance of 180 ̊C.

• Flash breaker tape when pulling through cured coating, such as epoxies.

• Holding and splicing difficult-to-stick-to surfaces, such as silicone liner.

Polyester film coated with silicone adhesive is designed for heat resistance especially for masking during powder coating and also for electrical insulation application. Also used for professional spray painting applications that requires masking, this features a special coated film backing that Possesses good resistance to temperature, solvent and water. This also protects that area from getting wet during sandpapering. Can easily stick on to low energy surfaces, making it suitable for masking for automotive applications, nonferrous Metals, Glass and various surfaces as well as Equipment of rubber or plastic parts. Easy to de-mask without leaving residue.

Features:

• Flexible, wet resistant masking

• Tape with a good tensile strength.

• Residue free removal.

• Easy unwinding for better workability

• Good Initial tack

• Easy Masking and de-masking

• High Shear & Easy De-Masking.

Applications:

• Paint masking.

• Masking gold fingers of printed masking circuit boards.

• Holding application.

• Cable Bundling.

• Masking during Powder coating/Epoxy coating

• Insulation – with BDV of 4.5KV and temp resistance of 180 ̊C.

• Flash breaker tape when pulling through cured coating, such as epoxies.

• Holding and splicing difficult-to-stick-to surfaces, such as silicone liner.