Listing ID #6633877
Company Information
Ask for more detail from the seller
Contact SupplierMeter | Meter | ||
---|---|---|---|
A | Over All Length | 3360mm | 11' - 0.28" |
B | Wheel Base | 980 mm | 3' - 2.6" |
C | Ground Clearance | 204 mm | 8.03" |
D | Roll Back Angle | 30odegree | |
E | Departure Angle | 27odegree | |
F | Over All Height | 1970 mm | 6'-5.5" |
G | Dump Height @ 40odegree | 2160 mm | 7'-1" |
H | Load Over Height | 2646 mm | 8'-8.2" |
I | Pin Height | 2813 mm | 9'-2.7" |
J | Dump Angle | 42odegree | |
K | Dump Reach | 588 mm | 1"-11" |
L | Max Reach at Full Height | 910 mm | 2"-11.8" |
M | Tread Width with spec tyre | 1245 mm | 4'-1" |
N | Bucket Width | 1580 mm | 5'-2.2" |
O | Width Over Tyre-standard | 1500 mm | 4'-11" |
Turning Radius | |||
Bucket | 2039 mm | 6'-8.2" | |
Tyre | 1125 mm | 3'-8.3" | |
Rear Chassis | 1426 mm | 4'-8.1" |
Machine Rating | |
Rated Operating Capacity | 604 Kg |
Tipping Load | 1208 Kg |
Pump Capacity | 60.0 Ipm |
System Relief Pressure | 18.0/23.0 Mpa |
Max Travel Speed | 14.0 km/hr |
Engine | |
Model | KUBOTA |
Fuel Type | Diesel |
Cooling | Liquid |
Max.Power @ 2700 rpm | 36.5kW (49.5HP) |
Torque | Nm 158.6 |
No.of. Cylinders | 4 nos |
Capacity | |
Fuel | 48 Ltrs |
Engine Oil | 9.5 Ltrs |
Coolant | 7.2 Ltrs |
Hydraulic System | 65 Ltrs |
LH Chain Case | 10 Ltrs |
RH Chain Case | 10 Ltrs |
Electrical | |
Battery | 12V |
Alternator | 90A |
Control | |
Vehicle Steering | Skid steering, Controlled by a Left hand side Joystick |
Loader Hydraulic Tilt and Lift | Single Joystick on right side |
Front Auxiliary (std) | Electrical switch on right hand side Joystick |
Established in the year 1995, we at Bull Machines Private Limited are a renowned and popular Manufacturer, Exporter, and Supplier of Earthmoving Equipment & Machines. We have specialization in Backhoe Loaders, Tractor Attachments, and Electric Wheelbarrows. All the products are highly appreciated by our past customers.
Our Mission
Bull Machines is on a mission to give outstanding services and products to allow customers to give value for money. Our prime focus is on creating a platform where we can better understand the needs of the customers better than them. We are on a mission to blend the excitement of youth with a maturity of practice to provide the right services.
Bull Machines is committed to creating a brand in a sector where we are considered synonyms of quality, ethics, and performance excellence. We will call innovation in designs and products to manage PEB performance in the industry.
Customer satisfaction and best quality are embedded in its supreme quality policy. The work power has a passion for excellence, is open to new ideas, and is committed to quality results. The company takes pleasure in its leadership in several areas and has a noteworthy presence in the field of welding.
Value
Offering the customers with equipment to meet tough job site demands and assisting them with the finest service in the industry – that is our assurance.
Based in Coimbatore, Tamil Nadu (India), the company is owned and managed by Mr. Karthick V (CEO).