Product Code: EKE 9702

Roads are public utilities built for providing speedy, safe and comfortable ride to the road users. The safety and comfort of the users is adversely affected by poor riding quality of the roads. The riding quality, also termed as unevenness or roughness is an important parameter for evaluation of surface condition of roads. Roughness is the distortion in the road profile, which is of main concern to the road users. It is caused due to the inherent properties of materials and the construction techniques. This further deteriorates through permanent deformation of the layers in the pavement structures.
The roughness of the pavement forms an important input to any Pavement Management System (PMS) in deciding upon the maintenance strategies to be applied on road surface. The riding quality is generally measured by response type instruments, which are either towed or mounted on the vehicle itself.
Bump Integrator also known as Roughometer or Automatic Road Unevenness Recorder gives quantitative integrated evaluation of surface irregularities on an digital counter / LCD screen. It comprises of a single wheeled trailer, with a pneumatic tyre mounted on a Bump Integrator
chassis, on which an integrating device is fitted. The machine has a panel board fitted with two / four sets of digital counters for accounting the unevenness index value.

Bump Integrator, conventional type

Overall Length : 2400 mm
Overall Width : 700 mm
Height : 1100 mm
Net Weight : 350 Kg (Approx.)
Tyre Size : 6.00 x 16.4 Ply
Inflation Pressure : 2.1 Kg/Cm (30 lbs./sq. inch)
Standard operation Speed 32 + 0.5 Km/Hour

Bump Integrator with preset facility

Same as model -II but with an additional facility to set length level from 50 meters to 9999 meters.

Micro Processor based Bump Integrator

Accumulates vertical undulations after every one centimeter on LCD counter.
Allows automatic changing & re-setting of the counter, after completion of every section.
Displays data of the set distances on the panel board Operates on 12 V & 220 volts.
Stores 2000 segment data - memory is provided with a battery backup.
The Data Output comprises of
i) Date & Time
ii) Section no.
iii) Length in meter
iv) Bumps in cm
v Preset Length in meter
vi Speed of vehicle
Windows compatible RS 232 port interface

Print Out Format:-

Bump Integrator with Unevenness Index

Same as Model IV but with an additional facility to define the category of Road as per the defined bins of good, fair, poor & very poor and corrected Unevenness Index Value (centimeter/ kilometer formula)

DD/MM/YY :  HH/MM/SS  Section No.
Preset Length : Bumps in CM Length in Meters
Corrected UI : Speed of UI Road Category

Axle Mounted Bump Integrator, conventional type

The system gives direct reading of the bumps in centimeters, with a least count of one centimeter and its wheel revolution counter gives direct reading of length in kilometer with a least count of one meter. Four numbers digital counters are provided with a digital display to enable testing at night also.

Axle Mounted Bump Integrator, with preset facility

Same as model -I but with an additional facility to set length level from 50 meters to 9999 meters.

Micro Processor based Bump Integrator

Accumulates vertical undulations after every one centimeter on LCD counter.
Allows automatic changing & re-setting of the counter, after completion of every section.
Displays data of the set distances on the panel board
Operates on 12 V & 220 volts.
Stores 2000 segment data - memory is provided with a battery backup.
The Data Output comprises of
i) Date & Time
ii) Section no.
iii) Length in meter
iv) Bumps in cm
v) Preset Length in meter
vi) Speed of vehicle
Windows compatible RS 232 port interface

Print Out Format:-

Axle Mounted Bump Integrator, with unevenness index

Same as Model III but with an additional facility to define the category of Road as per the defined bins of good, fair, poor & very poor and corrected Unevenness Index Value (centimeter/kilometer formula)

DD/MM/YY :         HH/MM/SS            Section No.
Preset Length :   Bumps in CM          Length in Meters
Corrected UI :     Speed of UI              Road Category

Product Code: EKE 9702

Roads are public utilities built for providing speedy, safe and comfortable ride to the road users. The safety and comfort of the users is adversely affected by poor riding quality of the roads. The riding quality, also termed as unevenness or roughness is an important parameter for evaluation of surface condition of roads. Roughness is the distortion in the road profile, which is of main concern to the road users. It is caused due to the inherent properties of materials and the construction techniques. This further deteriorates through permanent deformation of the layers in the pavement structures.
The roughness of the pavement forms an important input to any Pavement Management System (PMS) in deciding upon the maintenance strategies to be applied on road surface. The riding quality is generally measured by response type instruments, which are either towed or mounted on the vehicle itself.
Bump Integrator also known as Roughometer or Automatic Road Unevenness Recorder gives quantitative integrated evaluation of surface irregularities on an digital counter / LCD screen. It comprises of a single wheeled trailer, with a pneumatic tyre mounted on a Bump Integrator
chassis, on which an integrating device is fitted. The machine has a panel board fitted with two / four sets of digital counters for accounting the unevenness index value.

Bump Integrator, conventional type

Overall Length : 2400 mm
Overall Width : 700 mm
Height : 1100 mm
Net Weight : 350 Kg (Approx.)
Tyre Size : 6.00 x 16.4 Ply
Inflation Pressure : 2.1 Kg/Cm (30 lbs./sq. inch)
Standard operation Speed 32 + 0.5 Km/Hour

Bump Integrator with preset facility

Same as model -II but with an additional facility to set length level from 50 meters to 9999 meters.

Micro Processor based Bump Integrator

Accumulates vertical undulations after every one centimeter on LCD counter.
Allows automatic changing & re-setting of the counter, after completion of every section.
Displays data of the set distances on the panel board Operates on 12 V & 220 volts.
Stores 2000 segment data - memory is provided with a battery backup.
The Data Output comprises of
i) Date & Time
ii) Section no.
iii) Length in meter
iv) Bumps in cm
v Preset Length in meter
vi Speed of vehicle
Windows compatible RS 232 port interface

Print Out Format:-

Bump Integrator with Unevenness Index

Same as Model IV but with an additional facility to define the category of Road as per the defined bins of good, fair, poor & very poor and corrected Unevenness Index Value (centimeter/ kilometer formula)

DD/MM/YY :  HH/MM/SS  Section No.
Preset Length : Bumps in CM Length in Meters
Corrected UI : Speed of UI Road Category

Axle Mounted Bump Integrator, conventional type

The system gives direct reading of the bumps in centimeters, with a least count of one centimeter and its wheel revolution counter gives direct reading of length in kilometer with a least count of one meter. Four numbers digital counters are provided with a digital display to enable testing at night also.

Axle Mounted Bump Integrator, with preset facility

Same as model -I but with an additional facility to set length level from 50 meters to 9999 meters.

Micro Processor based Bump Integrator

Accumulates vertical undulations after every one centimeter on LCD counter.
Allows automatic changing & re-setting of the counter, after completion of every section.
Displays data of the set distances on the panel board
Operates on 12 V & 220 volts.
Stores 2000 segment data - memory is provided with a battery backup.
The Data Output comprises of
i) Date & Time
ii) Section no.
iii) Length in meter
iv) Bumps in cm
v) Preset Length in meter
vi) Speed of vehicle
Windows compatible RS 232 port interface

Print Out Format:-

Axle Mounted Bump Integrator, with unevenness index

Same as Model III but with an additional facility to define the category of Road as per the defined bins of good, fair, poor & very poor and corrected Unevenness Index Value (centimeter/kilometer formula)

DD/MM/YY :         HH/MM/SS            Section No.
Preset Length :   Bumps in CM          Length in Meters
Corrected UI :     Speed of UI              Road Category