C Type Power Press

Lubrication:Lubrication system is sufficient & accurate for lubricating in all bearing surfaces, sliding surfaces and moving parts without wasting of oil.
Frame:The frame is made of heavy strength steel fabricated plate with suitable cross ribbing for quality & accuracy with precision performance.
Table & Ram:Table & Ram are made of heavy duty high graded cast iron with seasoned. Both are perfectly aligned to each other to obtain quality job.
Gears:Gears are of cast steel or fabricated. Gear teeth are generated by imported hobbing.
Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

Product Details

Clutch:The clutch is of rolling key type & it is very rigid & better supported. The clutch gives continuous stroke for mass production.
Brake:The Brake is powerful and works on top dead centre and compensated by spring.
Lubrication:Lubrication system is sufficient & accurate for lubricating in all bearing surfaces, sliding surfaces and moving parts without wasting of oil.
Table & Ram:Table & Ram are made of heavy duty high graded cast iron with seasoned. Both are perfectly aligned to each other to obtain quality job.
Crank Shaft:Crank Shaft is made of special alloy steel and fitted in with gun metal bushes for accurate alignment.
Gears:Gears are of cast steel or fabricated. Gear teeth are generated by imported hobbing.
Frame:The frame is made of heavy strength steel fabricated plate with suitable cross ribbing for quality & accuracy with precision performance.
Fly Wheel:The Fly Wheel is made of high grade cast iron & it is balanced for storing & releasing adequate energy for the operations.

RT Power Press are designed and developed through years of experience in sheet metal working machines. RT Power Press are widely accepted in industries for continuous production runs, and in areas requiring accuracy and repeatability coupled with high production.

Available Model:

Available Model: ‘C’ Frame Fixed type ‘C’ Frame Inclinable type ‘H’ Frame Piller type Cross Shaft Press.

Options:

Geared drive Ungeared drive Pneumatic drive Stoke length change Dist. Bed to Ram change Dist. Centre to gap change Knock out system Auto lubrication system All Dimensions are in mm. Power supply 400/440 volts, 3 Phase, 50 Cycle. Geared Machine : 1440 RPM/Ungeared Machine : 960 RPM As day to day Improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice. All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation. & also available tailor made Power Press

Model No.	RPP 31	RPP 51	RPP 102	RPP 203	RPP 303	RPP 504	RPP 804	RPP 1005	RPP 1506	RPP 2006	RPP 2506
Tonnage Cap.	3	5	10	20	30	50	80	100	150	13-165	250
Stroke Adjustment	2 - 25	6 - 25	6 - 50	13 - 75	13 - 75	13 - 100	13 - 114	13 - 127	13 - 152	375	13 - 165
Depth of Throat	75	100	125	175	187	200	275	320	350	520	400
Dist Bed to Ram	130	150	200	280	300	350	450	450	500	520	550
Length & Width of Bed	200 x 150	350 x 200	450 x 250	500 x 350	550 x 375	650 x 400	750 x 550	900 x 640	1000 x 700	1050 x 750	1100 x 800
Hole in Bed	50	65	75	89	102	127	127	190	200	215	230
Hole in Ram	20	25	25	32	38	50	50	50	63	63	63
Crank Shaft Diameter	38	51	60	76	83	95	114	127	152	165	165
Fly wheel Diameter	330	356	406	508	560	762	762	813	915	1118	1170
Stroke per Minute	85	80	70	45	40	35	30	30	30	30	30
H P Required	0.5	0.5	1	2	3	5	7.5	10	15	20	25
Weight Approx	150	300	525	1000	1300	2300	4000	5400	6500	8500	11000