Camprofile Gaskets

Camprofile gaskets used as Heat Exchanger Gaskets consist of a metal core with concentric grooves on either side with sealing materials. The Sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g. Aluminium or Silver). Camprofiles can be used without sealing layers to provide an excellent seal but there is a risk of flange surface damage. These type of Gasket features excellent an_-blowout properties associated with the reliability of a solid metal-to-metal seal combined with soft sealing face to ensure a tighter joint. It is manufactured for all ranges including class 150# to class 2,500# & PN designated ranges. The Camprofile is the preferred gasket when improved performance at low seating stress is required. Camprofile is an ideal replacement for problem applications associated with jacketed gaskets.
Soft Iron, Low carbon steel, Monel Aluminium, Copper, Brass, Cupronickel 90%/10%, 70%/30%, Inconel 600,800 and different grades of Stainless Steel.
FILLER
Common filler materials used are Asbestos mill board, CAF, Non asbestos, PTFE and Grafoil. We have adequate capacity to produce any shape and size with many compartmental ribs out of different materials for heat transfer equipment, coolers, condensers, joints etc. Heat Exchanger gaskets are more compressible than sole-metal corrugated types and offer better compensation for flange irregularities when high pressures are to be sealed.
CLADDING METAL
When a Camprofile is replacing an existing gasket (eg. spiral wound gasket); KGF recommends a 4mm thick core to prevent unnecessary stresses on existing pipe lines. For new system, we recommend 5 mm thick cores. The value should be taken into account at the design stage.