Casted Spiralizer

WELLCARE manufactures spiral blade solid spiralizers. These are made of one piece high grade corrosion resistant  cast iron, aluminum alloy and non sparking metal-zinc  alloy. They are high impact and shock resistant, possess high tensile and yield strengths and are wellhead friendly. They provide maximum casing or wellbore standoff, the prime requisite of an  excellent primary  cement  job. This is irrespective  of lateral  loads.The straight  blades are self cleaning in nature and designed to enhance flow. They endure steep temperatures  in   the   wellbore, friction   factor is minimum,  with reduced drag and  torque, ensuring maximum fluid passage.Spiralizers provide  the almost   wall   contact   and   fluid   swirl.  They give optimum  flow area in highly deviated and horizontal wells. The casing  effectively reaches TD due  to the sloping   rare   ends  reducing drag.  The  slope  also ensures that  no  balling   between   the  vanes takes place, as scraping, gouging or digging  into the formation is eliminated. WELLCARE  Spiralizers  are developed in  response to  the  need   for better cementing  in  highly  deviated  and   horizontal wells. These are designed to provide optimum flow area. The 360 degrees  over lapping solid  vane provide maximum  wall contact  and  fluid swirl. Reduced flow  area  between   the spiral blades produces a vortex motion of  the fluids  for more fluid velocity with direction. These are made of high strength corrosion resistant cast aluminum and also non-sparking zinc alloy.  The 30 deg.  slope of the  vane  end  reduce drag and  aids the casing in  reaching TD.  This gentle  flow from  the  body  to the  height of the vane will eliminate  scraping, gouging or digging into  the formation  and   consequently reduce balling  between  the vanes.  They also posses high impact  and  shock resistance combined with tensile and  yield strength as well as resists corrosion.