Dubond's Hydrobuild LW Power is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation.
Standard Compliance / Specification
Meets the requirements of IS : 2645-2003
Areas of Applications

• Waterproofing of concrete and sand-cement mortars used in .
• Basements.
• Roof slabs and screeds.
• Water tanks & water retaining structures.
• External plastering.
• Bathrooms and balconies.
• Sumps and drains.

Features & Benefits

• Corrosion Resistant - Makes concrete more cohesive, hence protects steel better against corrosion.
• Compatibility - Being a liquid, easily dispersible & compatible with concrete/mortar mixes.
• Permeability - It reduces the permeability of water into concrete.
• Strength - The setting time and compressive strength of the concrete remains within the specification limits.
• Shrinkage - Reduces shrinkage crack development in plaster & concrete.
• Workability - Improves workability of freshly mixed cement concrete.
• Durability - Increases durability by improving waterproofing of concrete

Method of Application

• Charge cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1–2 minutes.
• Start addition of 75–80% mixing water & mix for 2-3 minutes.
• Hydrobuild LW Power is added as per the recommended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.
• Place the concrete or apply plaster, as needed.
• Cure the applied mortar or concrete as per good construction practices.

Precautions & Limitations

• Do not add Dubond's LW power directly to dry cement & aggregate mix.
• Maintain water-cement ratio as low as possible.
• Do not increase the dosage of Hydrobuild LW Power than the recommendation.

Shelf Life & Storage
Best before 2 years from the date manufacture when in sealed pack and stored under proper condition. Store in a cool & dry place.
Health & Safety Precautions

• Use rubber hand gloves & safety goggles, while using Hydrobuild LW Power.
• In case of contact with skin, wash with plenty of water.
• Keep out of reach of children.

Dubond's Hydrobuild LW Power is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation.
Standard Compliance / Specification
Meets the requirements of IS : 2645-2003
Areas of Applications

• Waterproofing of concrete and sand-cement mortars used in .
• Basements.
• Roof slabs and screeds.
• Water tanks & water retaining structures.
• External plastering.
• Bathrooms and balconies.
• Sumps and drains.

Features & Benefits

• Corrosion Resistant - Makes concrete more cohesive, hence protects steel better against corrosion.
• Compatibility - Being a liquid, easily dispersible & compatible with concrete/mortar mixes.
• Permeability - It reduces the permeability of water into concrete.
• Strength - The setting time and compressive strength of the concrete remains within the specification limits.
• Shrinkage - Reduces shrinkage crack development in plaster & concrete.
• Workability - Improves workability of freshly mixed cement concrete.
• Durability - Increases durability by improving waterproofing of concrete

Method of Application

• Charge cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1–2 minutes.
• Start addition of 75–80% mixing water & mix for 2-3 minutes.
• Hydrobuild LW Power is added as per the recommended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.
• Place the concrete or apply plaster, as needed.
• Cure the applied mortar or concrete as per good construction practices.

Precautions & Limitations

• Do not add Dubond's LW power directly to dry cement & aggregate mix.
• Maintain water-cement ratio as low as possible.
• Do not increase the dosage of Hydrobuild LW Power than the recommendation.

Shelf Life & Storage
Best before 2 years from the date manufacture when in sealed pack and stored under proper condition. Store in a cool & dry place.
Health & Safety Precautions

• Use rubber hand gloves & safety goggles, while using Hydrobuild LW Power.
• In case of contact with skin, wash with plenty of water.
• Keep out of reach of children.