We provide our clients with the best Centrifugal Blowers. These Centrifugal Blowers are extensively used for building-cooling. Our Centrifugal Blowers are energy efficient, high volumetric and have optimum pressure. Optimum pressure is the pressure needed to overcome pressure drops in air washer, filter and GI duct.
Room pressure
3 to 5 mm WG
Low RPM, large diameter of impeller and more no. of blades with large area are preferred.
As Per The Client Needs
High temperature up to 800 oC operations, generally used for annealing furnace.High Pressure Blowers up to 3000 mm of WC.Building cooling Blowers at optimum pressure and high volume of cooling air.
Benefits
Prevents Leakages from door openings cable entriesEnergy consumption is little due to low R.P.M. and optimum pressure
Casings
made from high quality HR/CR sheet (thick gauge) double inlet-descaled,Epoxy primer coated, degreased and Epoxy paint to defend from moisture.
Impeller
Double width (Blades on both the side of the centre plate)Backward curve limit load characteristicsDegreasedDescaled Epoxy primer coatedEpoxy paintStaticallydynamically balanced
Shaft
EN8 on the whole machined and grinding
Bearings
Heavy duty self aligning 223K series FAG or SKF types adopter sleevesUsage of heavy duty cast iron plumber blocks
Drive
V-belt DriveStatically and dynamically balanced pulleysLarge blowers Flat belts and Flat pulleys provided to save energy

We provide our clients with the best Centrifugal Blowers. These Centrifugal Blowers are extensively used for building-cooling. Our Centrifugal Blowers are energy efficient, high volumetric and have optimum pressure. Optimum pressure is the pressure needed to overcome pressure drops in air washer, filter and GI duct.
Room pressure
3 to 5 mm WG
Low RPM, large diameter of impeller and more no. of blades with large area are preferred.
As Per The Client Needs
High temperature up to 800 oC operations, generally used for annealing furnace.High Pressure Blowers up to 3000 mm of WC.Building cooling Blowers at optimum pressure and high volume of cooling air.
Benefits
Prevents Leakages from door openings cable entriesEnergy consumption is little due to low R.P.M. and optimum pressure
Casings
made from high quality HR/CR sheet (thick gauge) double inlet-descaled,Epoxy primer coated, degreased and Epoxy paint to defend from moisture.
Impeller
Double width (Blades on both the side of the centre plate)Backward curve limit load characteristicsDegreasedDescaled Epoxy primer coatedEpoxy paintStaticallydynamically balanced
Shaft
EN8 on the whole machined and grinding
Bearings
Heavy duty self aligning 223K series FAG or SKF types adopter sleevesUsage of heavy duty cast iron plumber blocks
Drive
V-belt DriveStatically and dynamically balanced pulleysLarge blowers Flat belts and Flat pulleys provided to save energy