Cetcoat Acrylic Waterproofing Coating

Product Code : 617

To avail the ready to use acrylic waterproofing coating, we are the one-stop destination across the globe. We are associated in #1 league of Manufacturers, Suppliers and Exporters of CETCOAT from Gujarat, India. Our proficient team processes the CETCOAT in line with global quality norms & standards. Packaged meticulously, desired quantity of CETCOAT is obtainable from us at fair-market prices.

Description : Single component, cold applied, solar reflective elastic, elastomeric membrane forming compound for durable waterproofing and protection systems.

Advantages :

• Provides excellent, reliable and long lasting waterproofing.
• After curing forms a membrane which is flexible, elastic and water-tight. Even porous building materials will not absorb water.
• Provides seamless and joint less seal throughout the surface, which is impervious to water.
• Economical- and ready to use.
• Light weight - compared to conventional roofing systems thereby loading on the roofs is reduces.
• Low labour costs- due to easy, simple and quick application.
• Provides moderate insulation due to solar reflection.

Area application :

• Roof slabs, terraces, balconies, chajjas, parapet walls etc.
• Waterproofing of new surfaces as well as for the repairs of old surfaces.
• Horizontal as well as vertical surfaces like flashing.

Direction for use :
Surface Preparation :

• Remove all dirt and loose particles from the surface by wire brush.
• For best results, damp the surface before coating.

Priming : For best result used primer coat 1 part of CETCRETE AR and 4 part water use as primer coat on wet surface.

Coating :

• CETCOAT thoroughly stirred to ensure a homogeneous and consistency.
• Apply 1st coat of CETCOAT with a stiff brush marking out the area applies like paint on prime surface.
• Apply polyester mat 140 gsm or geo textile mat 120 gsm on wet 1st layer.
• Apply 2nd coat after 6 to 8 hour of first coat with other direction.
• If require apply 3rd coat next day.

Properties :

• Solid Content : 70%
• Polymer Content : 38 %
• Hardness (Shore A) : 80 Shore A
• Tensile Strength : 2.65 N/mm2
• Elongation at Break : 100 %
• UV Resistant : Excellent : No thermal degradation,
• Adhesion Strength : 0.9 N/mm
• Water Vapour Transmission : 19 g/m2 /day
• Fungus Resistant : No algae & fungus Growth
• Crack Bridging : No cracks up to 2 mm width

Colour : Off-White & Grey. Also available other colour on request.

Coverage : 2 kg of CETCOAT will cover an area of 2.5 to 3 sq. mts. in two coats depend upon application and surface.

Packing : Supplied in 5 kg & 20 kg bucket.