Coated FRP Tank, for Chemical Storage, Certification : FAA Certified

Listing ID #6692857

Fabricated using the best quality and stress-tested fiberglass and polyester resins for both underground and above ground use. FRP (Fibreglass Reinforced Plastics, also known as GRP, or Glass Reinforced Plastics) is a modern composite material of construction for chemical plant equipment like tanks and vessels. FRP Chemical Equipments are manufactured mainly by Hand Lay-up and filament winding processes.
Chemical equipment that range in size from less than a metre to 20 metres is fabricated using FRP as material of construction.
FRP Tanks
An inlet, an outlet, a vent, an access port, a drain, and an overflow nozzle is what a typical storage tank made of FRP has. There are other features that can be included in the tank. Ladders on the outside allow for easy access to the roof for loading. The vessel must be designed to withstand the load of someone standing on these ladders, and even withstand a person standing on the roof. Sloped bottoms allow for easier draining. Level gauges allow someone to accurately read the liquid level in the tank. The vessel must be resistant to the corrosive nature of the fluid it contains. Typically, these vessels have a secondary containment structure, in case the vessel bursts.
Various Type of FRP & Dual Laminate Tanks

• Rectangular Tank
• Conical Bottom Tank
• Vertical Open Top Tank
• Cylindrical Vertical Tank
• Cylindrical Horizontal Tank

FRP Tank Dual Laminate
Due to the corrosion resistant nature of FRP, the tank can be made entirely from the composite, or a second liner can be used. In either case, the inner liner is made using different material properties than the structural portion Hence the name dual (meaning two) and laminate (a word commonly used for a layer of a composite material). If the liner is not made of FRP, there are multiple choices for a thermoplastic liner. The engineer will need to design the tank based on the chemical corrosion requirement of the equipment. PP, PVC, PTFE, ECTFE, ETFE, FEP, CPVC, PVDF are used as common thermoplastic liners.
FRP Tank Application
FRP tanks and Designed are widely used in the chemical industry in the following sectors: chlor-alkali manufacturers, fertilizer, wood pulp and paper, metal extraction, refining, electroplating, brine, vinegar, food processing, and in air pollution control equipment, especially at municipal waste water treatment plants and water treatment plants.
FRP Tank (Fibreglass Reinforced Plastics) used in Various Type Plants

• Power Plant
• Wastewater & Effluents Treatment Plants
• Food Processing
• Pulp and Paper Factory
• Electroplating / Galvanisation plants
• Metallurgical plants & Metal Finishing Industry
• Transportation
• Chemical Plants (agro chemicals, chemicals for pharma industries, organic / inorganic chemicals, dyes, intermediates, speciality chemicals etc)
• Fertilizers plants
• Textile Plant
• Edible Oil Industry
• Oil Refineries
• Beverage Plant

FRP Tank Materials of construction
If the liner is not made of FRP, there are multiple choices for a thermoplastic liner. The engineer will need to design the tank based on the chemical corrosion requirement of the equipment. PP, ECTFE, ETFE, FEP, CPVC, PVDF, PVC, PTFE are used as common thermoplastic liners.
FRP Tank Temperature Range Up to
25⁰ C to 180⁰ C.
FRP Tank Capacity
100 Litre , 250 Litre , 350 Litre , 500 Litre , 750 Litre , 1000 Litre , 1500 Litre , 2000 Litre , 3000 Litre , 3500 Litre , 5000 Litre , 7500 Litre , 10000 Litre , 12000 Litre , 15000 Litre , 18000 Litre , 20000 Litre , 25000 Litre , 30000 Litre, 35000 Litre, 40000 Litre , 45000 Litre , 50000 Litre , 60000 Litre .