We are the known provider of CNC Lathe Machine. The fundamental machine has firm headstock mounted on stress relieved and fabricated machine base. The machine spindles are mounted on precision bearings with higher accuracy. Key Spindle utilizes A32 Collets controlled by clamp baror blank and pneumatic Cylinder. Precut-200 is an accurate and economical CNC Lathe Machine which gives finest ancillaries and job output. Precut-200 has higher contribution of operating efficiency with higher use of tools, space, power, and time as well as also built of having parameters, maintaining surface speed as well as keeping non-cut time for minimum. Machine elements including bearings, ball screw, CNC systems with drives have been chosen from the finest products accessible in India. The CNC Lathe Machine is designed as well as developed by committed team of skilled and experienced craftsmen as well as under supervision of technical professionals.
Bed : The bed is the best grain mark 25 iron casting. This is well grooved to offer rigidity as well as it is proposed for smoother and effortless clip flow as well as removal.
Axes : The X and Z attribute precision ball screws sustained at both ends. For making sure stability as well as completely protected guided ways are very well spaced. Auto meter lubrication is given to all Guide ways as well as ball screws.
Spindle : Spindle is accumulated as well as tested in proscribed AC room. Super precision pointed contact bearings can be used ahead as well as rear of spindle. These bearings are oil lubricated with longer life.
Tail Stock : The tail stocks are supported on the flat and V guide ways.
Electrical System : The electrical essentials uses in machine are for highly reliable as well as globally accepted with sub systems, Siemens AC spindle motor, Siemens CNC systems, having controller are provided for standard products.
Cnc System : Siemens Sinumeric 802d Features

• Auto Referencing
• Backlash Compensation and Pitch Error
• Constant Surface Speed Control
• Direct Drawing Dimension Programming
• Electronic Hand Wheel
• G Code Compatibility having additional NC Builders
• Graphic Simulation
• Inch/Metric Switch able
• Part Count, Working Time, & Time Count
• Process Oriented Cycles
• Simultaneously 2 Axes Control
• Tool Nose Radius Compensation
• Tread Cutting Cycles
• 256 KB User Memory

 
Standard Features

• AC spindle motors
• AC Servo Digital Drive of Axis
• Auto & Manual Coolant System
• Centralized & Programmable Lubrication
• Electrical with quality devices & panel with A.C
• Hydraulic Chuck
• L.M. Guide ways
• Set of Sleeves
• Tailstocks  
• Simultaneously 2 Axes control
• Process – Oriented Cycles
• Thread cutting cycles
• Direct drawing dimension progamming
• Pitch Error & Backlash compensation
• Auto Referencing
• Constant surface speed control
• 256 KB User Memory
• Inch / Metric switch able
• Tool Nose Radius compensation
• Part Count, Time count & working time
• G Code compatibility with other NC builders
• Graphic simulation
• Electronic hand wheel

We are the known provider of CNC Lathe Machine. The fundamental machine has firm headstock mounted on stress relieved and fabricated machine base. The machine spindles are mounted on precision bearings with higher accuracy. Key Spindle utilizes A32 Collets controlled by clamp baror blank and pneumatic Cylinder. Precut-200 is an accurate and economical CNC Lathe Machine which gives finest ancillaries and job output. Precut-200 has higher contribution of operating efficiency with higher use of tools, space, power, and time as well as also built of having parameters, maintaining surface speed as well as keeping non-cut time for minimum. Machine elements including bearings, ball screw, CNC systems with drives have been chosen from the finest products accessible in India. The CNC Lathe Machine is designed as well as developed by committed team of skilled and experienced craftsmen as well as under supervision of technical professionals.
Bed : The bed is the best grain mark 25 iron casting. This is well grooved to offer rigidity as well as it is proposed for smoother and effortless clip flow as well as removal.
Axes : The X and Z attribute precision ball screws sustained at both ends. For making sure stability as well as completely protected guided ways are very well spaced. Auto meter lubrication is given to all Guide ways as well as ball screws.
Spindle : Spindle is accumulated as well as tested in proscribed AC room. Super precision pointed contact bearings can be used ahead as well as rear of spindle. These bearings are oil lubricated with longer life.
Tail Stock : The tail stocks are supported on the flat and V guide ways.
Electrical System : The electrical essentials uses in machine are for highly reliable as well as globally accepted with sub systems, Siemens AC spindle motor, Siemens CNC systems, having controller are provided for standard products.
Cnc System : Siemens Sinumeric 802d Features

• Auto Referencing
• Backlash Compensation and Pitch Error
• Constant Surface Speed Control
• Direct Drawing Dimension Programming
• Electronic Hand Wheel
• G Code Compatibility having additional NC Builders
• Graphic Simulation
• Inch/Metric Switch able
• Part Count, Working Time, & Time Count
• Process Oriented Cycles
• Simultaneously 2 Axes Control
• Tool Nose Radius Compensation
• Tread Cutting Cycles
• 256 KB User Memory

 
Standard Features

• AC spindle motors
• AC Servo Digital Drive of Axis
• Auto & Manual Coolant System
• Centralized & Programmable Lubrication
• Electrical with quality devices & panel with A.C
• Hydraulic Chuck
• L.M. Guide ways
• Set of Sleeves
• Tailstocks  
• Simultaneously 2 Axes control
• Process – Oriented Cycles
• Thread cutting cycles
• Direct drawing dimension progamming
• Pitch Error & Backlash compensation
• Auto Referencing
• Constant surface speed control
• 256 KB User Memory
• Inch / Metric switch able
• Tool Nose Radius compensation
• Part Count, Time count & working time
• G Code compatibility with other NC builders
• Graphic simulation
• Electronic hand wheel