This machine mills a taper on the connecting rod’s small end. The client used to do this machining operation on an VMC, which was a time consuming process. In order to reduce the time and deliver an output of one component every 15 seconds, we proposed a rotary table concept.A rotary table of our own make will be mounted on the base.Two fixtures will be designed for 1st setup milling operation (1st side angle milling of a fresh component) and two fixtures will be designed for 2nd setup milling operation (2nd side angle milling after the completion of 1st side angle milling).The 1st setup and 2nd setup fixtures will be mounted at every alternate positions, to come after one another, while indexing.The two axes slide systems consists of a horizontal servo driven slide for feed, and a vertical slide for setting depth of cut.Machine will be provided with touch panel HMI, for easy parameter setting of feed and positions.

This machine mills a taper on the connecting rod’s small end. The client used to do this machining operation on an VMC, which was a time consuming process. In order to reduce the time and deliver an output of one component every 15 seconds, we proposed a rotary table concept.A rotary table of our own make will be mounted on the base.Two fixtures will be designed for 1st setup milling operation (1st side angle milling of a fresh component) and two fixtures will be designed for 2nd setup milling operation (2nd side angle milling after the completion of 1st side angle milling).The 1st setup and 2nd setup fixtures will be mounted at every alternate positions, to come after one another, while indexing.The two axes slide systems consists of a horizontal servo driven slide for feed, and a vertical slide for setting depth of cut.Machine will be provided with touch panel HMI, for easy parameter setting of feed and positions.