Concrete Mixer

The mixer is composed of five main components, mixing drum, mixing blade, frame, worm gear box and electrical control box. The main functions are as follows:: mixing drum cylinder is composed of curved hot plate welded to the inner wall and bottom are provided with lining boards and fixed with screw, the cylinder bottom is provided with a discharge port, by rotating the handle shaft material can control the outlet opening or closing, after mixing, coagulation by soil unloading hopper.
Mixing blade: the component is fixed on the stirring blade seat which can rotate clockwise and rotates together. Two of the stirring blades welded on a tripod stirring blade seat, which is provided with two of mixed leaves, in the stirring blade seat is welded with the inner and outer scraper each one, it can be installed inside the outer blade, each one, mix to scrape adhesion tube inside and outside the tube wall at any time during the mixing process the inner and outer scraper using clamping structure in use for a long time after wear, with the replacement of the scraper. In addition, the clearance between the stirring blade and the bottom of the cylinder can be adjusted arbitrarily in the clearance between the inner scraper and the cylinder wall. The web clip is a combined clamping device for the cylinder and the cylinder cover.
The frame is mainly composed of: steel welded, the bottom is equipped with three rubber wheel and axle with the front wheel through the steering rack and the connecting rod, so that when necessary and motor vehicle brake hook for long distance transfer, the frame is arranged below the four supporting feet, when the agitator work is determined, should be adjusted to use four supporting the weight of the whole foot supporting and all rubber wheel to start operation.
Worm gear box: worm gear box installed in the central part of the frame below, as reducer, mainly through the triangle belt wheel and the input shaft .