Conductivity Controller, Weight : 900gms, 1Kg

Conductivity/TDS Controller Model 160-COND

Features

 Auto/Manual temperature compensation selectable

 Conductivity and TDS selectable from front panel

 Cell Factor selectable for both 1.0 and 0.1

 4 Step Range selection 0.1μs to 199.9ms for conductivity

 Digital calibration for Conductivity/TDS

 Auto Temp Compensation using PT100 sensor

 Dual set limit with separate relay outputs

 Settable hysteresis for both set limits

 Bright Red LED display with separate display for set limit-1

 Aesthetically designed front panel with membrane switches and ABS cabinet

Specifications

 Display : 0.56” Red LED 7 segment Display for Conductivity/TDS

                  0.56” Red LED 7 segment Display for Set-Limit-1

 Ranges : Conductivity: 19.99ms 199.9ms
                                      1999 μs 0.1 Cell 19.99ms 1.0 Cell
                                      199.9μs 1999 μs
                                      19.99μs 199.9μs

                                      TDS: 0-1999ppm

 Resolution : Conductivity: 0.01ms or 0.01μs depending on range & Cell factor

                                           TDS: 1ppm

 Auto Temp. Comp. : 0-100 ̊C using PT100 external sensor

 Manual Temp. Comp. : Settable from front panel from 0-100.0 ̊C

 Cond/TDS Calibration : Digital calibration by factor multiplication from 0.75-1.25

 Recorder Output : Isolated 4-20mA => 0-2000 (for whatever unit and resolution selected (Maximum termination 250Ω)

 Control Output : Two set of NO-P-NC, 5 Amps potential free Relay Contacts.

Relay 1 ON, for Cond/TDS < Set Limit1 – Hysterises1

Relay 1 OFF, for Cond/TDS > Set Limit1

Relay 2 OFF, for Cond/TDS < Set Limit2

Relay 2 ON, for Cond/TDS > Set Limit2 + Hysterises2

 Accuracy : 0.5% ± 1 Digit

 Supply : 220V AC ±10% @ 50Hz

 Enclosure : Plastic (ABS). Size -96x96x110mmm

 Weight : 900gms