Nandan recognizes the fact that the facilities are the biggest constraint in the execution of orders. We have designed our facilities to be of redundant capacity. We have factories in four locations around Mumbai in Andheri, Kurla, Navi Mumbai and Khopoli. We are also planning a further addition to capacity by means of additional plant within the next 1-2 years. Head Office : Marol 2500 sq ft with small assembly facility. Close to our hearts as it was established 19 years ago. Works (Old) : Kurla 15,000 sq ft workshop which is in the heart of the city and 4 km from the airport. Works Unit 1 : The Turbhe unit of NGSEPL is in the heart of Maharashtra Industrial Area in Turbhe (District Thane) with access to rail and road infrastructure. The unit is completely owned by NGSEPL. The unit consists of the following facilities :

• 22,500 sq. ft. with shed of 5 m high and having a concrete floor 12â�� thick and asbestos sheet
• Office building with 4000 sq of space housing a conference room, staff rooms, directors offices, stores, design room and even an in-house pantry

Scope of expansion : The facility can be expanded here by increasing the height of shed as well as the office building. The current space is planned with optimal layout and with full space utilization and leaves scope for future expansions. Works Unit 2 : Khopoli New facility with operates started in March 2008 and having a total area of 40,000 sq ft and built up shed (phase 1 ) of 15,000 sq ft of 9m height and having an EOT of 5 ton capacity Another feature is just 20 kms from JNPT port of Mumbai. Capabilities :

• All kinds of fabrication
• Designing and execution
• PUF and FRP in house
• Special Purpose machine conceptualization and delivery

Design Capabilities :

• Licenses owned for ALIBRE 2012 for 3 D modeling and analysis
• Autodesk Simulation mechanical 2012 for FEA modeling and analysis
• Knowledge to operate Solidworks and ProE
• Access to third party design firm (LUMIUM) based in Ahmedabad who have tremendous experience in modeling and huge engineering projects

Machinery Used :

• EOT Crane (5 ton)
• Profile cutting machine (80mm thick capacity with 2000mm dia)
• Lathe upto 4 feet for machined components
• Hydraulic Hacksaw machine
• Part off saws for pipes
• MIG welding machines
• TIG welding machines
• Arc welding machines Inverter based 400A, 300A, 200A, 150A
• Sheet metal press for 4mmx2500mm capacity
• Hydraulic press 200, 150, 100, 80 ton capacity
• Radial Drill machines 50mm, 38mm
• Pedestal Drill Machines 38mm
• Magnet drill machines 20mm
• Hand drill machines 6mm, 10mm, 13mm, 16mm, 19mm
• Angle Grinder 125mm, 175mm
• Hydraulic powerpacks for testing upto 6000 psi
• Pug machines for straight cuts
• Jib cranes
• Crane pulleys for site jobs
• Hydraulic floor crane
• Vertical Access equipment on wheels upto 10m
• Stackers for loading/ unloading
• Painting systems for Polyurethane, enamel, rust proof paints
• Fibre Glass upto 6mm thick and size of 7.1mx3m
• PUF with density of 40 kg/m^3 and insitu poring as well as pads with standard size of upto 2m panel
• Stainless steel work incuding final buffing and polishing upto pharmaceutical grade

Access to third party processes :

• Sheet metal bending upto 12mmx 6300mm single stroke
• Lathe for long shafts, screws and rounds upto 600mm and 3m long
• Hot dipped galvanizing
• Powder Coating
• Hard chrome plating
• Centerless Grinding, shaping, slotting, etc
• Wheel cranes upto 11-20 tons for loading/ unloading
• Specialized tackles for site assembly

Material already working with :

• MS (Flats, Tubes, Channels, Angles, etc)
• Aluminum (sheets, chequered plates, tubes, sections, etc)
• Stainless Steel 304 (sheets, flats, sections, grills)
• FRP
• PUF

Nandan recognizes the fact that the facilities are the biggest constraint in the execution of orders. We have designed our facilities to be of redundant capacity. We have factories in four locations around Mumbai in Andheri, Kurla, Navi Mumbai and Khopoli. We are also planning a further addition to capacity by means of additional plant within the next 1-2 years. Head Office : Marol 2500 sq ft with small assembly facility. Close to our hearts as it was established 19 years ago. Works (Old) : Kurla 15,000 sq ft workshop which is in the heart of the city and 4 km from the airport. Works Unit 1 : The Turbhe unit of NGSEPL is in the heart of Maharashtra Industrial Area in Turbhe (District Thane) with access to rail and road infrastructure. The unit is completely owned by NGSEPL. The unit consists of the following facilities :

• 22,500 sq. ft. with shed of 5 m high and having a concrete floor 12â�� thick and asbestos sheet
• Office building with 4000 sq of space housing a conference room, staff rooms, directors offices, stores, design room and even an in-house pantry

Scope of expansion : The facility can be expanded here by increasing the height of shed as well as the office building. The current space is planned with optimal layout and with full space utilization and leaves scope for future expansions. Works Unit 2 : Khopoli New facility with operates started in March 2008 and having a total area of 40,000 sq ft and built up shed (phase 1 ) of 15,000 sq ft of 9m height and having an EOT of 5 ton capacity Another feature is just 20 kms from JNPT port of Mumbai. Capabilities :

• All kinds of fabrication
• Designing and execution
• PUF and FRP in house
• Special Purpose machine conceptualization and delivery

Design Capabilities :

• Licenses owned for ALIBRE 2012 for 3 D modeling and analysis
• Autodesk Simulation mechanical 2012 for FEA modeling and analysis
• Knowledge to operate Solidworks and ProE
• Access to third party design firm (LUMIUM) based in Ahmedabad who have tremendous experience in modeling and huge engineering projects

Machinery Used :

• EOT Crane (5 ton)
• Profile cutting machine (80mm thick capacity with 2000mm dia)
• Lathe upto 4 feet for machined components
• Hydraulic Hacksaw machine
• Part off saws for pipes
• MIG welding machines
• TIG welding machines
• Arc welding machines Inverter based 400A, 300A, 200A, 150A
• Sheet metal press for 4mmx2500mm capacity
• Hydraulic press 200, 150, 100, 80 ton capacity
• Radial Drill machines 50mm, 38mm
• Pedestal Drill Machines 38mm
• Magnet drill machines 20mm
• Hand drill machines 6mm, 10mm, 13mm, 16mm, 19mm
• Angle Grinder 125mm, 175mm
• Hydraulic powerpacks for testing upto 6000 psi
• Pug machines for straight cuts
• Jib cranes
• Crane pulleys for site jobs
• Hydraulic floor crane
• Vertical Access equipment on wheels upto 10m
• Stackers for loading/ unloading
• Painting systems for Polyurethane, enamel, rust proof paints
• Fibre Glass upto 6mm thick and size of 7.1mx3m
• PUF with density of 40 kg/m^3 and insitu poring as well as pads with standard size of upto 2m panel
• Stainless steel work incuding final buffing and polishing upto pharmaceutical grade

Access to third party processes :

• Sheet metal bending upto 12mmx 6300mm single stroke
• Lathe for long shafts, screws and rounds upto 600mm and 3m long
• Hot dipped galvanizing
• Powder Coating
• Hard chrome plating
• Centerless Grinding, shaping, slotting, etc
• Wheel cranes upto 11-20 tons for loading/ unloading
• Specialized tackles for site assembly

Material already working with :

• MS (Flats, Tubes, Channels, Angles, etc)
• Aluminum (sheets, chequered plates, tubes, sections, etc)
• Stainless Steel 304 (sheets, flats, sections, grills)
• FRP
• PUF