Listing ID #1339041
Company Information
Ask for more detail from the seller
Contact Supplier
Your quest for superb quality Cuplock Scaffolding System ends at Millennium. We furnish Galvanized Cuplock Scaffolding that is used in large number of industries or varied industrial applications. Manufactured from40 mm NB Pipes along with the cups that are prefabricated at each 500 mm c/c, Cuplock System Scaffolding is highly demanded by our global customers available in the size of 3.0, 2.5,2.0,1.5,1.0, cuplock system is can be availed at most competitive prices of the industry. Also, we provide availability in custom-built specifications.
Scaffoldings (On Sale/ On Rental)
Steel Scaffolding has now a days became the most popular, safe, fast and economical method used in construction industry. There are various different systems of scaffolding since inception. I would brief some of them over here.
Bamboo (Wooden) System Scaffoldings
Conventionally, BAMBOO system was introduce for the scaffolding purpose. The system was well running and still it is used at some sites in the market. There are many reasons for cut down of usage of this system. Now a days the construction has gone to peaks. There are many high rise buildings, so there this system has shown found little bit risky. And even government has also banned this system as scaffolding at their sites, only due to risk involved in it. Secondly it takes lot of time for erection & dismantling. Thirdly, the labour cost increases due more time. Fourthly, you required special labourers for erection & dismantling and Finally, on the whole in this system the safety norms are not covered much.
Pipes & Couplers
This system was introduce to overcome the difficulties faced in the bamboo system. Due to this system the risk factor has reduce to some level. The system consist of one vertical pipes is to be clamped with one horizontal pipe with the help of couplers. But the drawback of this system was that if the clamps are not tied or fixed properly, then there were chances of accident at times. So, system did not captured the market for longer period.
�H� Frames System Scaffolding
This system was designed in such a way that the problems faced in the above was eradicated due to its prefabrication of horizontal and vertical pipes. There are no clamps required to fix it up. Hence the risk factor is reduced a lot. Secondly, the erection speed is increased as less no. of pipes are to be fixed up rather than PIPES & COUPLERS. Thirdly, during special heights, this scaffolding erection becomes very much risky as the whole weight of �H� is heavy and it is difficult to fix it up at heights.
Cuplock System Scaffoldings
The latest and the best option available in the market is CUPLOCK system of scaffolding. It is the safest system of scaffolding at present. It is made out of 40 mm NB scaffolding pipes with special designed cups fabricated at every 500 mm to get optimum strength and support. CUPLOCK system is very versatile in erection & dismantling. You can erect in whatever pattern you want. The cuplock system can be erected in circular way also. The material here in this system in single pipes only, so it is very easy to transport, transfer and erect. It requires less space for storage, no loose members are there which gets misplaced, the locking system here is such designed that no chances of accidents. The life of scaffolding is very long. We can say it pays back in long run.
Our Product Range
Cuplock scaffoding,"H" frames, Accessories like Fix, Swivel, Sleeve, Putlog, Staircase, Girder, Gogo, etc.., Joinpin, Spigot Pins, Base plates, Universal jacks, Stirrup head, Props, Spans, Forwork components & its accessories & Concrete hardwares like floor forms, Wall Forms, Soldiers, Tie rods, Weidge & clips, Single clips, and many more.
Scaffolding Products
Adjustable Telescopic Props
Steel Props are made from continuous welded steel tubes.
Inner Tube : 48.3 OD
Outer Tube : 60.3 OD
| SIZES | HEIGHT (IN MTR) | SAFE AXIAL LOAD (KGS) | ||
|---|---|---|---|---|
| Closed | Extended | Closed | Extended | |
| 0N | 1.10 | 1.75 | 3500 | 3000 |
| 1N | 1.50 | 2.75 | 3200 | 2300 |
| 2N | 2.00 | 3.25 | 3000 | 2200 |
| 3N | 2.00 | 3.75 | 2900 | 2000 |
| 4N | 3.00 | 4.65 | 2300 | 1150 |
Advantages of Cuplock Scaffolding
Speed of Erection Cuplock Provides major savings in erection and dismantling times thus minimizing on site cost. It can be erected 75 faster than traditional scaffoldings. When not in use, its modular constructions ensure minimal space requirements for storage. Simplicity and Strength The success of cuplock lies in the node point or fastening method. Four horizontal can be fastened at one time making a very rigid connection. The horizontal bear directly on the verticals and are firmly clamped by the action of the cup. There are no loose parts to lose. The rigid node point allows for high horizontal loads experienced with a 57kN leg load. Versatality When investing in equipment's it must be as versatile as possible. Cuplock can be erected for straight, curved and circular configuration for both access and support, and for independent and mobile towers. Durability With no loose parts and with corrosion protection it can be easily stored and maintained. Designed to be tough, cuplock is highly resistance to damage. When not in use, it's modular construction ensure minimal space requirement for storage.
To enquire about the desired product(s), just check the box and then click “Enquiry Now” button which is provided below.
Nature of Business
Manufacturer / Exporter / Importer / Trader
Number of Employees
Below 20
Year of Establishment
2004
Connect with us
For Buyer 
For Seller 
Help 
