Product Code: EKE 355-1

24-Hour Cycle from time of mixing.
Controlled 35ºC or 100ºC ± 2ºC Curing Temperature for Concrete.
Controlled 27ºC ± 2ºC Curing Temperature for grey cement.

The tank has been designed to accommodate 150 mm/70.6 mm cube moulds upto 36/72 cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each mould is provided. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The tank is heated by a immersion heater under normal conditions and refrigeration system. For grey cement, the temperature is controlled at 35ºC or 100ºC ± 2ºC/27ºC ± 2ºC, expect for the 15 minutes after immersion of the freshly-made specimens.

EKE 355-1 Curing Tank for 6/1 2 moulds of 150 mm/ 70.6 mm size
EKE 355-2 Curing Tank for 12/24 moulds of 150 mm/70.6 mm size
EKE 355-3 Curing Tank for 24/48 moulds of 150 mm/70.6 mm size
EKE 355-4 Curing Tank for 36/72 moulds of 150 mm/70.6 mm size

Accelerated curing :

For warmer water method, Temp. Range : 55 ± 2ºC

EKE 355-1 ACW Accelerated curing Tank for 6 moulds of 150 mm size.
EKE 355-2 ACW Accelerated curing Tank for 12 moulds of 150mm size.
EKE 355-1 ACB Accelerated curing Tank for 6 moulds of 150 mm size.
EKE 355-1 ACB Accelerated curing Tank for 12 moulds of 150mm size

Product Code: EKE 355-1

24-Hour Cycle from time of mixing.
Controlled 35ºC or 100ºC ± 2ºC Curing Temperature for Concrete.
Controlled 27ºC ± 2ºC Curing Temperature for grey cement.

The tank has been designed to accommodate 150 mm/70.6 mm cube moulds upto 36/72 cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each mould is provided. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The tank is heated by a immersion heater under normal conditions and refrigeration system. For grey cement, the temperature is controlled at 35ºC or 100ºC ± 2ºC/27ºC ± 2ºC, expect for the 15 minutes after immersion of the freshly-made specimens.

EKE 355-1 Curing Tank for 6/1 2 moulds of 150 mm/ 70.6 mm size
EKE 355-2 Curing Tank for 12/24 moulds of 150 mm/70.6 mm size
EKE 355-3 Curing Tank for 24/48 moulds of 150 mm/70.6 mm size
EKE 355-4 Curing Tank for 36/72 moulds of 150 mm/70.6 mm size

Accelerated curing :

For warmer water method, Temp. Range : 55 ± 2ºC

EKE 355-1 ACW Accelerated curing Tank for 6 moulds of 150 mm size.
EKE 355-2 ACW Accelerated curing Tank for 12 moulds of 150mm size.
EKE 355-1 ACB Accelerated curing Tank for 6 moulds of 150 mm size.
EKE 355-1 ACB Accelerated curing Tank for 12 moulds of 150mm size