Cut Wire Shots

Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

Cut wire shot is produced by cutting wire into lengths equal to the wire diameter. If required the particles are rounded to remove the sharp corners. The sharp edges of the cut shot may also be....

View More Details

Send Enquiry

Company Information

Systematic Group of Companies

Vikhroli, Mumbai, Maharashtra

View Number

Member Since 15 Years
Nature of Business Retailer
Year of Establishment 1969

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

Cut wire shot is produced by cutting wire into lengths equal to the wire diameter.
If required the particles are rounded to remove the sharp corners.
The sharp edges of the cut shot may also be useful, in case of additional cleaning requirement.

Advantages

Improved Consistency: Exhibits highest consistency in terms of shape and size
Highest Durability: Has a wrought internal structure with almost no cracks, porosity, etc.
Low Dust Generation: Our Cut wire shots exhibit the lowest dust generation rate
Improved Part Fatigue Resistance: Our peened parts and specimens exhibit higher average and consistent life as compared to those peened with equivalent cast steel shot
Lowest Surface Contamination: Unlike other media, our shots do not leave any residue or Iron Oxide coating over the particle surface.

Standards

Our cut-wire shot is certifiable to the following specifications:

IS:5873 arrow AMS–2431/8
MIS–S–13165 arrow SAE J441
AMS–2431/3B arrow VDF 8001
As per customer's requirement

Technical specification

Material	SIZES	CUT WIRE SHOT	VICKERS HARDNESS RANGE	ROCKWELL HARDNESS RANGE
Steel	0.10 mm - 1.60 mm (.0039 inch - .062 inch)	Low Carbon Cut wire shot Grade I High carbon Cut wire shot Grade II & III	< 35 Rc 45 - 55 Rc 55 - 62 Rc	< 350 HV 446 - 595 HV 595 - 697 HV
Stainless Steel	0.45 mm - 1.60 mm (.017 inch - .062 inch)	Grade 302/304 Cut Wire shot Special Sys Cut wire shot	Min. 45 Rc Min. 35 Rc	Min. 446 HV Min. 350 HV
Aluminum	0.50 mm - 2.00 mm (.020 inch - .080 inch)	Grade 5053 Cut Wire Shot - Full Hard Grade 1100-1345 Cut Wire Shot - Full Hard	SOFT	N/A
Zinc	0.61 mm - 3.35 mm (.024 inch - .1319 inch)	Commercial Quality Pure Zinc Cut Wire shot	SOFT	N/A

SIZE IN MM	SIZE IN INCH.	CUT WIRE DESGN	CAST SHOT DESGN.	GRITS DESGN.	SHOT PEENING DESGN.
0.1	0.0039	CW-4	S-40	G-120	P-4
0.2	0.0079	CW-8	S-70	G-80	P-8
0.3	0.0118	CW-12	S-110	G-50	P-11
0.36	0.0142	CW-14	S-140	G-45	P-13
0.43	0.0169	CW-17	S-170	G-40	P-16
0.51	0.0201	CW-20	S-200	G-35	P-19
0.58	0.0228	CW-23	S-230	G-30	P-23
0.71	0.028	CW-28	S-280	G-25	P-28
0.81	0.0319	CW-32	S-330	G-20	P-33
0.89	0.035	CW-35	S-360	G-19	P-35
1.04	0.0409	CW-41	S-390	G-18	P-39
1.19	0.0469	CW-47	S-460	G-16	P-46
1.37	0.0539	CW-54	S-550	G14	P-55
1.59	0.0625	CW-62	S-660	G-13	P-62
1.8	0.0709	CW-71	S-710	G12	P-71
2	0.0787	CW-79	S-780	G-10	P-78
2.38	0.0937	CW-94	S-930	G-8	P-93
2.82	0.111	CW-111	S-1110	G-7	P-111
3.35	0.1319	CW-132	S-1320	G-6	P-132