Listing ID #1570289
Company Information
Ask for more detail from the seller
Contact SupplierThe main function of a cylinder liner is to serve as the inner wall of a cylinder, which then acts as a sliding surface for the piston ring while ensuring the retention of lubricant within it. A cylinder liner is also known as a cylinder sleeve which is a replaceable metal sleeve aligned within the cylinder to a form a surface which can withstand the wear and tear from the piston.Â
Cylinder Liners – Sleeves, made of grey cast-iron, ought to have desired casting and machining qualities, viz. strength, toughness, hardness and wear resistance. These are mainly of two types – Dry liner-sleeves and Wet liner-sleeves.Â
The liners-sleeves are ‘cast-in fit’, force (press) fit or slip fit. The interference between its outer diameter and bore-hole walls depends on fit-type from 0.050 to 0.075 mm. These are available in wide range suitable for light, medium and heavy duty application.
At Garima Global, Cylinder Liners are manufactured using the best method i.e. Centrifugal Cast Process. In this process, the molten metal is poured into a mould revolving at a very high speed, and because of the centrifugal force the impurities are separated easily. This centrifugal force also causes the molten metal to spread evenly across the mould, thus resulting in castings which are of finer grain and free from porosity.Â