Dryspell

.Microprocessor Controller

.Pre-filter rating 0.3 microns (coalescer) 

.Shuttle valve for Low Presssure drop 

.All Aluminium resist oxidation & scale formation

.Dewpoint better than -40 c

.Design Patented 

Principal of operation

Drying Cycle : Moist air from the compressor is sent through the coalescing filter. Here water & oil coalesces, gets purged through the auto drain valve.

The relatively clean air with water vapour passes through the aluminum drying tower filled with desiccant gets completely dried (upto 40 c dew point) and then passes through a built in after filter. The desiccant fines from the towers are completely removed and clean dry air is let out through the outlet port for use.

Regeneration cycle : During the regeneration cycle. The sudden depressurization brings out water molecules trapped in the Desiccant pores to the surface of the beads. A small portion dry compressed air from the drying TOWER then passes over the desiccant through the regeneration orifice built in the Top Block. This results in complete regeneration of the Desiccant.

Dryspell

.Microprocessor Controller

.Pre-filter rating 0.3 microns (coalescer) 

.Shuttle valve for Low Presssure drop 

.All Aluminium resist oxidation & scale formation

.Dewpoint better than -40 c

.Design Patented 

Principal of operation

Drying Cycle : Moist air from the compressor is sent through the coalescing filter. Here water & oil coalesces, gets purged through the auto drain valve.

The relatively clean air with water vapour passes through the aluminum drying tower filled with desiccant gets completely dried (upto 40 c dew point) and then passes through a built in after filter. The desiccant fines from the towers are completely removed and clean dry air is let out through the outlet port for use.

Regeneration cycle : During the regeneration cycle. The sudden depressurization brings out water molecules trapped in the Desiccant pores to the surface of the beads. A small portion dry compressed air from the drying TOWER then passes over the desiccant through the regeneration orifice built in the Top Block. This results in complete regeneration of the Desiccant.