Company Information
Member Since 13 Years
Nature of Business RetailerAsk for more detail from the seller
Contact Supplier
*The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed
*Available in: lb-in, kg-cm and N-m (mN-m）
*Peak, Real Time and Peak Down measuring mode (selectable)
*800 data memory.
*Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
*Programmable screw tightening counter
*Programmable Auto Zero function resets unit to zero for easy operation
*Both CW and CCW operation
*ASCII format output(USB)
*Runs on internal Ni-MH batteries (for 12 hours) Auto shut-off after 10 min. of non-use
* AC charger and carrying case included.
| pecification | DID-05 | DID-4 | |
| Measuring range | 2.0 - 500 mN-m | 0.020 - 4 N-m | |
| 0.020～5 kgf-cm | 0.20～40 kgf-cm | ||
| 0.020～4.5 lbf-in | 0.20～35 lbf-in | ||
| Accuracy | ± 0.5% (in case of reading 499 or less = last digit +/- 3 reading) | ||
| Display | The 4 figures digital display of LCD | ||
| The measurement direction | CW-CCW (right and left) | ||
| Measuring mode | P-P Peak | Holding Peak Load Value | |
| T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | ||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||
| C Real-time output | Load torque value is outputted every about 1/ 160. | ||
| Decision function | Setting of torque value | Programmable High and Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing | |
The Maximum, the minimum, and the average value | The data number, the maximum, the minimum value, and the average value of memory data are displayed. | ||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) When outputting data,the cable(USB miniB) is needed. | |
| Data memory | 800 data | ||
| A setup of the number of counts | One to 99 count (count in a direction with a bundle) | ||
| Power supply | Ni-MH chargeable battery 1.2V×4cells 800mAh | ||
| Auto power save | 10 minutes no use, automatically switch off. | ||
| Charging time | From empty - less than 5hours | ||
| Continunous working time | 12 hours | ||
| Bit /Socket part | φ4 | HEX6.35 | |
| Weight | about 180g | about 400g | |
| Attachment | Bit　（＋）　＃１　 For one-wey ×1　For fixation×1 | Bit　（＋）　＃１　＃２ | |
| Accessories (one piece each) | AC/DC Adaptor (Charger) | ||
| An inspection report, a proofreading certificate, a traceability system figure | |||
Connect with us
For Buyer 
For Seller 
Help 
Pitampura, Delhi 
Send Enquiry