Digital Weighing Scale Square

Model: MCP 2003B

ISO, CE Mark, WHO GMP

 Basic Standards

·         Capacity: 0-180 Kgs

·         Graduation: 0.1 Kg

·         Display: 4 Digits LCD

·         Battery: 3V 7 Battery

·         Temp: for work: 10-35 Deg. C

·         Turn on auto, Up automatically on that

·         Unit: Kg/lb

·         Turn off after 10 seconds

·         Hint of low-tension: “LO-“

·         Hint of wrong: “…”

·         Hint of out: :o-ld”

 Operate Explain

·         Vibrate the surface with foot and it will switch on automatically.

·         After switch on, “8” will display and it will move from left to right until “0.0” appears.

·         Stand on the scale in balance and start to weigh, when the weigh is set, the figure will flash and then you can read it.

·         The figure will keep flashing for 10 seconds and the scale will switch off.

·         Replace the battery if the screen display :LO”

·         Try again if the screen shows “Err”

·         Keep it dry and don’t touch water.

Attention

·         When unused, the scale should be left unloaded to avoid over assumption of power and failure of work.

·         Try to stand in the middle place to avoid slip.

·         Stand on the scale in good balance to avoid failure of lock and incorrect illustration.

·         No heavy knock on the scale.

·         Keep it away from water and don’t wash it with water

·         Battery have been set up.