Disc Diffuser

We are offering disc diffuser.
Ring diffuser made up of aero tubes can be used in all the areas where disk diffusers are used. The diffuser can be joined to the header with 3/4 inch ss nipples. Thickness of disk diffuser membrane is only 1 mm while it is 6 mm in ring diffusers. Operating pressure up to 5 kg in aerotubes while it is .7 kg in membranes. Sotr 4.8 kg/hour in aerotube it is 2.7 kg in disk diffusers/tube diffusers. Circle or ring diffusers are fine bubble diffusers. This diffusers are fitted with one 90 cm aerotube. 45cm on the right and another 45 cm on the left side of the pvc pipe which is of 40 cm length. Both sides of the pvc pipe is closed with end caps. In the middle we have saddle or threaded pvc t. This saddle or threaded pvc t can be fitted with 3/4 inch ss nipple which is a standard one for all disk diffusers or tubular diffusers. From blower the pipe headers are fitted with saddles. Hence the ss nipple works as a connecting air link between headers and diffusers. The fine bubble aeration from the diffuser helps to control bod and cod. Each meter length of aerotube will give 5 m3 air/hour.
technical datasheet:
type of aero tube
microporous tube
size
od 25.4 mm; id 12.6 mm;
moc of aero tube
car tyre rubber and pe
moc of aero tube clamps
ss304
moc of nipple
pvc
operating temperature of aero tube
70
effective area of aerotube
0.078 m2
area of influence zone
1 m2
optimum through put
5 cubic meters per hour per meter tubing
minimum through put
0.5 cubic meters per hour per meter tubing
maximum through put
8.5 cubic meters per hour per meter tubing
maximum allowable pressure
5 kg/cm2
make
colorite plastic usa
standard oxygen transfer rate
4.2 kg o2/kw