Dolphin 125 Universal Silicone Sealant

Application

- Sealing construction joints in concrete structures.
- Sealing masonry joints, balcony, window and door perimeter joints.
- Façade and metal cladding joints.
- Aluminum angle joints.
- Pinhole repairs and shower screen.

SURFACE PREPARATION 
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.
TOOLING AND FINISHING 
Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one continuous stroke. Remove masking tape immediately after tooling is completed.
CLEANUP AND REMOVAL 
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77°F (25°C) in dry warehouse conditions, DOLPHIN 125 UNIVERSAL SILICONE SEALANT has a shelf life of 15 months from manufacturing date. Containers should always be kept sealed when not in use.