Dolphin Acryseal Acrylic Sealant

DOLPHIN ACRYSEAL ACRYLIC SEALANT is one-component high quality, plastic-elastic sealant based on acrylic emulsion. The product is almost odor free and is not corrosive towards metals. After application, the product forms a tough rubber by evaporation of water from the sealant. DOLPHIN ACRYSEAL ACRYLIC SEALANT prevents air and moisture from passing through cracks and joints.

- Suitable for interior and exterior applications like perimetral joints in building and other type of construction. 
- Suitable for general applications. 
- Joints in the building industry between wood, metal window frames concrete and brick work. 
- Joints between stairs and wall, between concrete and ceiling elements, between wall and ceiling skirting boards windows sills and aerated concrete for inside and outside application.

SURFACE PREPARATION 
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint - free, cotton cloth. Wipe dry immediately with clean cloth before the solvent evaporates from the surface.
TOOLING AND FINISHING 
DOLPHIN ACRYSEAL ACRYLIC SEALANT should only be used where slight joint movement is anticipated. For extremely deep joints, use foam joint filler. Tool sealant after application and before tack-free skin formation. Tooling of sealant should be done in one continuous stroke. Use masking tape adjacent to joint to obtain a cleaner joint. Remove masking tape immediately after tooling.
CLEANUP AND REMOVAL 
Excess caulk should be cleaned off tools and non-porous surfaces while it is in the uncured state using a wet cloth. Cured sealant can only be removed mechanically.

When stored in original unopened container at or below 77°F (25°C) in dry warehouse conditions, DOLPHIN ACRYSEAL ACRYLIC SEALANT has a shelf life of 24 months from manufacturing date. Containers should always be kept sealed when not in use.