Double Clutch Combination

Supply TypeManufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

Working EXCEL double clutch combination consists of two EFMC series clutches in a single housing and a single tandom shaft. EDCC are manufactured considering the higher frequency of forwarding &....

View More Details

Send Enquiry

Company Information

Excel Electromagnetic

Kaladwas, Udaipur, Rajasthan

View Number

Member Since 14 Years
Nature of Business Manufacturer

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

Working

EXCEL double clutch combination consists of two EFMC series clutches in a single housing and a single tandom shaft. EDCC are manufactured considering the higher frequency of forwarding & reversing mechanics. A combination of clutches are used for reversing revolution of the driven member with driving member turning in one direction. Also combination of clutches are used to increase or decrease the speed during operation without stopping the driving member.. Load is being transferred either by the first or second clutch. At a time only one clutch gets engaged while other remains idle.

SAFETY FACTOR [K] To ensure necessary transmission safety also under extreme operating conditions adequate safety factor must be considered the value of which depends on operating conditions namely, the type of load, prime mover etc. Typically [K] For Electric drive

Low masses equal loading & non-intermittent operation [2.0]
Low masses light shock load & intermittent operation [2.5]
Medium masses, light shock load & intermittent operation [3.0]
Large masses, light shock load & intermittent operation [3.0]
Non-overhauling loads [2-3]
Overhauling loads [3-4]
Diesel engine drive [4-5]
Compressor driven [5-6]

However, we recommend you to perform detailed calculations for which please consult us.
Note :

1 Nm = 0.012 Kgm = 0.737 Ib-ft = 10.2 kgcm
Keyways to Indian standard / Din Standard.
Standard Voltages 24 VDC ; 96 VDC ; 190 VDC ; other voltages on request.

Size Selection And Ordering Information Approximate necessary Torque or Size of a unit for applications involving low inertia & low operating frequency is determined as ; TORQUE = [9550 x (K.W. / SPEED)] x SAFETY FACTOR [K]
Ordering Information :