Draw Texturing Double Density Machine MODEL HSS-AX3-TS

machine feature of ax3-ts

primary heater open type :

open type heater : plasma coated high curvature twin track , optimized track profile insure effective heating, high efficient heater , vapour phase type, available in  1.6 m and 2 m length in a block of 8 position. Threading system with 2:1 sledge with twist stopper.

primary heater close type: close type tubular heater, vapour phase, energy saver heaters available in block of 8 position 1.75 m or 2m length. Threading system with telephone guide arrangement and 2:1 sledge with twist stopper as an option.

secondary heater : close type tubular heater , vapour phase type , energy saver heaters

available in block of 8 or 16 position. 1.4 meter effective length to reduce torque in the textured yarn.

cooling zone :

high curvature 1.25 m cooling zone with optimized track geometry natural air cooled or forced cooling, nitrogenised and ultra-finish twin track per position with precise setting with open heater.

1.25 m cooling zone with nitrogenised ultra- finish twin cooling pipe per position with tangential path on tube periphery with entry and exit guide to insure effective cooling.

• twist unit:twin unit tri- axial spindle, optimizedgeometry, high stability twisting unit equipped with 54.5 mm dia. And 9 mm thick disc. Optional 1-5-1 combination.
• extra feed shaft at intermediate position for intermingling zone.
• 1fr, nfr and 3fr equipped with nip roller as standard & apron system as an option.
• 2fr equipped with apron system as a standard supply
• heavy duty low maintenance yarn take-up cradles for producing precise package up to      250 mm dia. And 250 mm length. Taper angle 6, 9 & 18 degree.
• new improved traverse box gives low noise, low vibration, low oil splashing result in higher oil top time and reduced maintenance.
• new revised axial mechanism to improve package build-up. 8-cycle programed with 12 mm axial displacement max. And dwell 30% to 60%.
• new oiling system with large diameter grooved rollers, constant oil level control by gravity feed system, excellent oil penetration, and minimum oil splash.
• advance p.c software for controlling& monitoring all the machine parameters.
• low height & operator friendly thread line reduces threading time.

• all machine drives by individual invertors closed loop feedback with encoder & timing belt.

  direct drive option for individual motor and shaft to reduce the number of belts.

• provision for online tension monitoring system and doff timer.
• split type machine supply for both sides independent operation as an option.
• spandex feeder attachment as an option.