DUCT GLUE (DUCT LINER ADHESIVE)

DESCRIPTION:

81 – 10 is a high quality, quick tack adhesive specially formulated for brush application. It is specially formed adhesive to bond all type of insulation materials. i.e G.I aluminum air conditioning ducts and steel asbestos sheets. It provides excellent adhesion and good coverage.

USAGE:

81 – 10 is used for bonding fibrous insulation to concrete, wood gypsum board and rigid construction materials. And for laminating layers of bonding urethane foam to sheet metal and gypsum board, bonding low and high density fiber glass insulation. Interior / exterior sheet metal galvanized metal stainless steel and aluminum air conditioning and heating ducts, adhering Kraft-back foil and foil jacketing to urethane foam.

ADVANTAGES:

• Excellent bonding ability and permanent adhesion
• Recommended for bonding variety of insulation material.
• Easy application
• Resistant to water and moisture
• Requires no auxiliary clamp devices
• Excellent aging properties

APPLICATION:
All surface must to be coated must be clean, dry and free from dust, grease and any loose materials. Apply 81 – 10 by brush, roller or spray to the metal foil or rigid substrate having no bare spot. Apply insulation 0-20 minutes later. Open time depends upon atmospheric condition. To ensure good bond, adhesive should be sufficiently wet.

Ensure while applying 81 – 10 that there should be no source of fire nearby as the product is HIGHLY FLAMMABLE. Application must be carried out in a well ventilated area. Avoid prolonged breathing vapors.

All brushes and tools should be cleaned immediately after use.

PACKING:
Available in 13 Kg pails.

STORAGE:
Store at room temperature in well ventilated area. Shelf life is one year in unopened container.
SPECIFICATION:

Appearance : L / Green

Application temp: 20ºC to 60ºC
Base : Synthetic Rubber
Consistency : 1000±200 cps
Coverage : 5sqm/lit (approx)
Cure time : 15 to 20 mins
Flash point : Highly Flammable Solvent
Open Time : 0-25 mins
Service Temp : -18ºC to 75ºC
Solid Content : 20 ± 20%
Solvent : Aliphatic Solvent System

HEALTH AND SAFETY INSTRUCTION:

Caution should always be exercised with all the construction chemicals. Gloves and goggles must be worn while using these chemicals. Any splashes to the eyes or skin should immediately be treated with fresh water. Should any of the products be accidentally swallowed, do not induce vomiting and call for medical help immediately.