
Company Information
Ask for more detail from the seller
Contact SupplierInput voltage range typically 140V to 280V AC depending on the model. Output voltage is a stable regulated voltage, usually 220V with ±1-3% variation. Frequency supported is 50Hz or 60Hz. Regulation is automatic voltage regulation (AVR) using a servo motor or electronic control. Response time to voltage fluctuation is typically less than 0.1 seconds. Capacity or power rating ranges from 1 kVA to several hundred kVA. Cooling is done by natural air or forced air cooling with a fan. Protection features include overload protection, short circuit protection, under-voltage and over-voltage protection. Available in single phase and three phase versions. Efficiency generally exceeds 95%. Mounting options include floor standing or panel mounted. Control can be manual or digital display with monitoring options. Operating temperature ranges from -10°C to +50°C and humidity tolerance is up to 90% non-condensing.
\| Models | p2p-240-dvr3-25P | p2p-240-dvr3-20P | p2p-240-dvr3-12.5P |
|---|---|---|---|
| Input Voltage Range (Ph-N) | 180~300Vrms | 190~285Vrms | 210~270Vrms |
| Nominal Output (Ph-N) | 240Vrms +/-0.5% (typical) +/-1% (max.) | ||
| Frequency (Hz) | 50Hz +/-5% | ||
| Connection | 3P + N | ||
| Technology | IGBT based converter technology Closed loop control Dual voltage (ip/op) and converter current tracking Independent voltage regulation for each phase | ||
| Reaction Time | < 100 us | ||
| Protections | Output disconnector switch Internal Bypass mode Output under/over voltage protection Semiconductor fuses Over current Soft Start Input MCB/MCCB (optional) Type 2 surge suppression | ||
| Efficiency | > 98.5% (typical) | ||
| Environment | Upto 45 degrees (with adequate air circulation) Indoor Installation (IP42) Upto 95% relative humidity (non-condensing) Altitude upto 1000m | ||